Call Redirect - NEC DT830 Series User Manual

CALL REDIRECT

Example:
DT Series Station A views on the DT Series display
the Station Number or Caller ID of an Incoming Call
and immediately redirects the call by pressing a
Function Key. The destination of the Call Redirect
will be the Call Forwarding-Don't Answer Destina-
tion or the Recall Destination if the call is trans-
ferred without Call Forwarding-Don't Answer being
set at the station.
Note: This feature is available in North America only.
Call Redirect To Call Forward-Don't
Answer Destination
STEP 1: Station A sets Call Forward-Don't Answer to
Station B.
STEP 2: Station C dials Station A, it rings and displays
Station C's number on the display.
STEP 3: Station A presses the Call Redirect Key.
STEP 4: REDIRECT is displayed on the LCD, and the
call immediately forwards to Station B.
DT830 DT430/410
Using Soft Key
STEP 1: Station A sets Call Forward-Don't Answer to
Station B.
STEP 2: Station C dials Station A, it rings and displays
Station C's number on the display.
STEP 3: Station A presses the REDIR soft key.
STEP 4: REDIRECT is displayed on the LCD, and the
call immediately forwards to Station B.
- Or -
Call Redirect to Recall Destination When Call
Is Transferred Without Call Forwarding-Don't
Answer Being Set
STEP 1: Station B calls Station C.
STEP 2: Station C answers the call and transfers it to
Station A and then releases the call.
STEP 3: Station A rings.
STEP 4: Station A presses the Call Redirect Key.
STEP 5: REDIRECTING is displayed on Station A and
the call immediately recalls to Station C.
162