Toshiba 32L310U20 Manual page 57

Problem Solution
Dark, poor, or no
• Try another channel. The station
picture (screen is
lit), but sound is
• Make sure that the antenna or
good.
• Adjust the brightness. See
• Press PIC SIZE to change the
• If you are using an antenna and
• Make sure that the video cables
• The video cable(s) you are using
• Try another channel. The station
No color, dark
• Try another channel. The station
picture, or color is
not correct.
• Adjust the color settings. See
• Make sure that the video cables
• Make sure that the antenna or
• If you are using an antenna and
Only snow (noise)
• Try another channel. The station
appears on the
screen.
• Make sure that the antenna or
• If you are using an antenna and
may be experiencing problems.
cable TV is connected correctly
and securely. See Connecting a
cable or satellite box on page
or Connecting an antenna or
cable TV (no box) on page 14.
Adjusting the TV picture on
page 35.
aspect ratio. See Adjusting the
picture size on page 36.
the signal strength is low, adjust
the antenna or use a highly
directional outdoor antenna or
set-top antenna with a built-in
amplifier.
are connected correctly and
securely to your TV.
may be bad. Try a new set.
may be experiencing problems.
may be experiencing problems.
Adjusting the TV picture on
page 35.
are connected correctly and
securely to your TV.
cable TV is connected correctly
and securely. See Connecting a
cable or satellite box on page
or Connecting an antenna or
cable TV (no box) on page 14.
the signal strength is low, adjust
the antenna or use a highly
directional outdoor antenna or
set-top antenna with a built-in
amplifier.
may be experiencing problems.
cable TV is connected correctly
and securely. See Connecting a
cable or satellite box on page
or Connecting an antenna or
cable TV (no box) on page 14.
the signal strength is low, adjust
the antenna or use a highly
directional outdoor antenna or
set-top antenna with a built-in
amplifier.
www.tv.toshiba.com
Problem
Picture quality is
good on some
channels and poor
on others. Sound
is good.
12
Dotted lines or
stripes appear on
the screen.
12
Double images.
The picture has a
few bright or dark
spots.
Video description
or voice guide
does not work.
12
32" 720p 60Hz LED TV
Solution
• The problem may be caused by
a poor or weak signal from the
broadcaster or cable TV
provider.
• If you connect to cable without
a set-top box and experience
poor picture quality, you may
need to install a set-top box to
improve signal reception and
picture quality. Contact your
cable TV provider about
upgrading to a set-top box.
• Make sure that the antenna or
cable TV is connected correctly
and securely. See Connecting a
cable or satellite box
or Connecting an antenna or
cable TV (no box) on page 14.
• If you are using an antenna and
the signal strength is low, adjust
the antenna or use a highly
directional outdoor antenna or
set-top antenna with a built-in
amplifier.
• Make sure that the video cables
are connected correctly and
securely to your TV.
• The video cable(s) you are using
may be bad. Try a new set.
• Other devices (for example, a
surround sound receiver,
external speakers, fans, or hair
dryers) may be interfering with
your TV. Try turning off one
device at a time, then back on to
determine which device is
causing interference. After you
have determined which device
is causing interference, move it
further from the TV to eliminate
the interference.
• Use a highly directional outdoor
antenna, cable TV, or satellite
TV.
• A few bright or dark spots on an
LCD screen is normal. It does
not affect the operation of
your TV.
• Make sure that your TV is not
muted and the volume is turned
up.
• Make sure that the options
listed under the Accessibility
menu are turned on. See
Adjusting sound settings
page 39.
• Video descriptions are not
available on all broadcasts.
• Some remote functions are not
narrated.
on page 12
on
57