Husqvarna QCE7250W User Manual page 41

Problem
You want to activate the
True Fan Cooking PLUS
function, but the Plus Steam
indicator does not switch on.
You want to activate the
True Fan Cooking PLUS
function, but the Plus Steam
indicator does not switch on.
The water in the cavity em-
bossment does not boil.
The water comes out of the
cavity embossment.
The appliance is activated
and does not heat up. The
fan does not operate. The
display shows "Demo".
12.2 Service data
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
Possible cause
You did not select the heat-
ing function that support
Plus Steam.
The Plus Steam does not
work.
The temperature is too low.
There is too much water in
the cavity embossment.
The demo mode is activa-
ted.
The necessary data for the service centre
is on the rating plate. The rating plate is
on the front frame of the oven cavity. Do
not remove the rating plate from the
oven cavity.
ENGLISH
Remedy
Refer to "Setting the func-
tion: True Fan Cooking
PLUS".
Deactivate the appliance
with the house fuse or the
safety switch in the fuse box
and activate it again.
Refer to "Setting the func-
tion: True Fan Cooking
PLUS".
Set the temperature at least
to 110 °C.
Refer to "Hints and tips"
chapter.
Deactivate the oven and
make sure that the appliance
is cold. Wipe the water with
a cloth or sponge. Add the
correct amount of water to
the cavity embossment. Re-
fer to the specific procedure.
1. Deactivate the oven.
2. Press and hold at the
same time
.
3. The first digit on the dis-
play and Demo indicator
start to blink.
4. Enter the code 2468 by
turning the knob for the
temperature right or left
to change the values
and press to confirm.
5. The next digit starts to
blink.
6. Demo mode deactivates
when you confirm the
last digit and the code is
correct.
41