NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
CAUTION:
Incorrect alignment of the heat sink can damage the system board and processor.
NOTE:
If either the system board or the heat sink is replaced, use the thermal pad provided in the kit to ensure that
thermal conductivity is achieved.
Topics:
•
Procedure
•
Post-requisites
Procedure
1. Place the heat sink on the system board and align the screw holes on the heat sink with the screw holes on the system board.
2. Tighten the captive screws in the reverse order (4->3->2->1) to secure the heat sink to the system board.
3. Replace the three (M2x3) screws that secure the heat sink to the system board.
Post-requisites
1. Replace the fan.
2. Replace the
base
cover.
3. Replace the
optical drive
(optional).
Replacing the heat sink
computer. After working inside your computer, follow the instructions in
28
After
Replacing the heat sink
47