Replacing The Optical-Drive Connector Board; Procedure; Post-Requisites - Dell Inspiron 15 5000 Service Manual

Replacing the optical-drive connector board

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•

Procedure

•

Post-requisites

Procedure
1. Align the screw hole on the optical-drive connector board with the screw hole on the palm rest and keyboard assembly.
2. Replace the screw (M2x2) that secures the optical-drive connector board to the palm rest and keyboard assembly.
3. Connect the optical-drive connector-board cable to the system board.
4. Close the latch that secures the optical-drive connector-board cable to the system board.
Post-requisites
1. Replace the base cover.
2. Replace the optical drive (optional).
computer. After working inside your computer, follow the instructions in
Replacing the optical-drive connector board
14
After
29