Related Manuals for Hydrotek 5000E Series
Summary of Contents for Hydrotek 5000E Series
- Page 1 Sensor Faucets and Flush Valves OPERATION & MAINTENANCE MANUAL 5000E Series Faucet www.hydrotekintl.com 5055 Forsyth Commerce Rd, Ste 124, Orlando, FL 32807 Phone (800) 922-9883 | Fax (866) 670-5580...
- Page 2 U.S. Patent 6192530B1 AC or Battery Powered Sensor Operated Faucet Sensor Faucets and Flush Valves The 5000E Series faucet is an elegant piston operated sensory faucet that provides a vandal resistant, no touch lavatory solution that promotes better hygiene and energy savings.
- Page 3 Hydrotek Automatic Faucets 5000E Series Deck Mounted / Non-mixing Meets ANSI/ASME A112.18.1 M-1989 Operation: A continuous, invisible beam is emitted from the sensor. The faucet is activated by placing hands under the spout within the effective range of the beam. Water starts to flow immediately for as H-5000E (AC Powered) long as the user’s hands remain in the sensor range.
-
Page 4: Installation Instructions
INSTALLATION INSTRUCTIONS H-5000E AC Powered Sensor Operated Mixing Faucet Hydrotek Non-Mixing Automatic Faucet Installation Instructions (AC Powered) 1. Prior to installing this faucet, thoroughly flush all Model H-5000E water lines and replace stop washers, if necessary. 2. To ensure proper operation, " DRY TEST " the... - Page 5 INSTALLATION INSTRUCTIONS HB-5000E DC Powered Sensor Operated Mixing Faucet Hydrotek Non-Mixing Automatic Faucet Installation Instructions (Battery Powered) Model HB-5000E 1. Prior to installing this faucet, thoroughly flush all water lines and replace stop washers, if necessary. 2. To ensure proper operation, " DRY TEST " the faucet by loosening the Cover Screw (7) and removing the Top Cover (1).
-
Page 6: Troubleshooting Guide
IMPORTANT: Periodic maintenance is required for smooth and trouble-free operation of this faucet. For service and inquiry about available repair kits, please call Hydrotek Technical Support at (800) 922- 9883. -
Page 7: Maintenance Tasks
4. Loosen the two screws holding the Battery Holder/ Control Module and remove it. 5. Install the new Battery Holder/Control Module ensuring the sensor eye is fitted correctly to the faucet body. Solenoid Module For further questions, please call Hydrotek Technical Support at (800) 922-9883. -
Page 8: Assembly Parts
5000E Series Sensor Operated Mixing Faucet Assembly Parts No Description Part Number Solenoid Module HCE-004 Solenoid Coil HCE-019 Solenoid Assembly HCE-194 HCE-018A (AC) Control Module Assembly HCE-018B (DC) Flexible Supply Tube HCE-026 In-Line Filter HC-009A Filter Screen HC-020 Aerator Connector...
Need help?
Do you have a question about the 5000E Series and is the answer not in the manual?
Questions and answers