Setting Hba Configuration By Using Qlogic - NEC Express 5800 Series Installation Manual

Chapter 1 Installing OS
1.6

Setting HBA configuration by using QLogic

1. Start from the CPU/IO module 0, and then perform the following.
In the QLogic prompt window which appears during POST, press Ctrl+Q or Alt+Q to launch
1-1
QLogic Fast! UTIL.
Select "Configuration Settings", and then press Enter.
1-2
Important Before setting the HBA configuration by using QLogic BIOS, it is required to
complete the storage settings such as creating a logical disk.
Important Make sure that the PRIMARY LED on CPU/IO module 0 is lit.
Express5800/R320d-E4, R320d-M4 Installation Guide (VMware 5.5)
1. Setup Procedure
27