Setting Dual Disk Configuration By Rdr (Rapid Disk Resync) Function - NEC N8800-155F User Manual

Setting Dual Disk Configuration by RDR (Rapid Disk Resync)
function
This device sets dual configuration for each disk by the RDR function of the ft server control
software.
By setting RDR, as the following figure and table show, dual configuration is set between the disks
of the corresponding slots, and these disks are recognized as one virtual disk by Windows (such as
Disk Management and Device Manager).
Slot 0
Slot 0
PCI module 10 Slot 0
PCI module 10 Slot 1
PCI module 10 Slot 2
PCI module 10 Slot 3
PCI module 10 Slot 4
PCI module 10 Slot 5
PCI module 10 Slot 6
PCI module 10 Slot 7
* In the table above, PCI module names correspond as follows:
PCI module (for CPU/IO module 0) - PCI module 10
PCI module (for CPU/IO module 1) - PCI module 11
Slot 1 Slot 3
Slot 2 Slot 4
Slot 2 Slot 4
Slot 1 Slot 3
Slots corresponding to the mirroring process
Corresponding slot
PCI module 11 Slot 0
PCI module 11 Slot 1
PCI module 11 Slot 2
PCI module 11 Slot 3
PCI module 11 Slot 4
PCI module 11 Slot 5
PCI module 11 Slot 6
PCI module 11 Slot 7
Slot 5 Slot 7
Slot 6
Slot 6
Slot 5 Slot 7
Windows Setup 4-49