Philips Avalon CTS M2720A Service Manual page 43

Changing the Power Supply/Metal Chassis Assembly
Step 5: Replacing the Receiver Board
1 Insert the antenna socket into its aperture in the new metal chassis and locate the metal screw fixing post
through the hole in the left hand side of the receiver board.
Locate screw
fixing post
through hole
in board
Position the receiver board so that all the screw holes on the board align with the screw fixing points on
2
the chassis.
Drive in the four screws (A) using a T-10 Torx driver to secure the receiver board to the chassis.
3
To Purchase, Visit Avobus.com or call 1-800-674-3655
4 Disassembly/Reassembly
Screw locations
Insert antenna
socket through
hole in chassis
37