Page 1: Activation
Page 3: Troubleshooting
Activation process
Before using the LEUCHTIE for the first time please remove the transport protection (insulation cap).
It is the red stopper located at the opposite side of the size sticker.
Opening:
1. Separate the tube from the battery pack by
pulling them apart with a slight angular
movement, taking care not to use excessive
force (1). In doing so, hold the silicone sleeve
onto the battery pack.
2. Remove the red insulation cap (2) and discard.
Fix the attachment loop:
3. In order to secure the LEUCHTIE to a collar/
harness with the enclosed fixation loop, pull the
open end of the tube through both transparent
rubber rings of the loop (3).
Closing:
4. Insert the tube straight into the battery pack.
Make sure that the contact spring at the end of
the LED tubing goes in straight and is not bent
over in any way.
5. Press tube and battery pack firmly together as
far as it can go.
Turning the LEUCHTIE on and off
Simply slip the LEUCHTIE over the dog's head and
it will turn on automatically thanks to a sensor as
soon as the battery pack is facing downwards.
When the battery pack faces upwards the LEUCHTIE
will turn off after approx. one minute. Therefore,
suspend the LEUCHTIE e.g. on a hook for storage.
Instruction Manual
LEUCHTIE
Easily rechargeable via USB charging station
Please read and observe the following safety instructions to enable you
to get the most out of your new LEUCHTIE as possible. Please keep this
document in a safe place.
®
Premium Easy Charge
Page 2: Recharging the batteries
Page 4: Safety information
Stand: 09/2018
Need help?
Do you have a question about the Premium Easy Charge and is the answer not in the manual?
Questions and answers