Table of Contents
Advertisement
Phone settings
System
Changing the system PIN
(depending on the base)
¤
Settings
Enter the current 4-digit system PIN (default: 0000)
new 4-digit system PIN
Resetting the system PIN
(depending on the base)
Resetting the base to the original PIN code 0000:
¤
Unplug the network cable from the base
Registration / paging key on the base
network cable to the base
. . . the base is reset and the system PIN is set to 0000
All handsets are de-registered and must be re-registered. All settings
are reset to the defaults.
Resetting the handset
You can reset individual settings. Entries in the directory and call list, and the
handset's registration to the base, are maintained.
¤
Settings
. . . Perform factory reset?
Resetting the base
(depending on the base)
A reset disables mode No Radiation, resets individual settings and deletes all
lists.
The system PIN is reset to the original code 0000.
The time and date are not affected. The answer machine (if available) is not
ready until after about 15 seconds after the base is reset.
Resetting the base from the menu
The handsets remain registered. The system PIN is not reset.
¤
Settings
Reset?
OK
42
OK
Base
OK
press and hold the key for at least 5 seconds
OK
Handset
OK
OK
Base
Availability and operation of the functions
may differ on your telephone.
OK
System PIN
OK
press and hold the
at the same time reconnect the
OK
Reset Handset
OK
Reset Base
OK
Enter the
OK
OK . . .
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the E290HX and is the answer not in the manual?
Questions and answers
Telefone Gigaset E290H não toca quando chamo. No ecran tem um sino com X sobreposto - Que fazer ?
Your Gigaset E290H phone may not be ringing due to the following reasons:
1. Time Control is Enabled: If Time Control is activated, the phone may be set to suspend ringing during certain hours. You can check and disable this setting by navigating to:
- Handset: `Call Manager` → `Time Control` → `Activation`
- Base with Speaker: `Settings` → `Base` → `Audio Settings` → `Time Control` → `Activation`
2. Anonymous Call Blocking is Enabled: If your phone is set to mute calls where the caller's number is withheld, these calls will not ring. You may need to check this setting.
3. The Bell Icon with an X: This indicates that the ringer is muted or turned off. You can check the ringer settings and adjust the volume to restore ringing.
To resolve the issue, ensure the ringer is enabled, Time Control is deactivated if not needed, and anonymous call blocking is turned off if necessary.
This answer is automatically generated