Page 3
Pneumatic Height Adjustment Pneumatic height adjustment is used to adjust the seat to fit different heights. Pull the lever up and lift the body out of the chair to raise the seat. To lower the seat, remain seated and pull the lever up. Top Elevation...
Seat Depth Adjustment Seat depth adjustment moves the seat pan to accommodate for different leg lengths. Pull up on the lever and slide the seat front to back. Top Elevation...
Page 5
Tilt Tension Tilt tension adjusts the force necessary for a user to recline in the chair. Turn the crank forward (clockwise) to tighten the tension and backward (counter-clockwise) to loosen the tension. Top Elevation...
Page 6
Back Stop Back stop allows users the choice of selecting an upright position or limiting the amount of recline. Push down on the lever to activate the back stop, pull up to release it. Top Elevation...
Page 7
Forward Tilt Forward tilt allows users to sit forward in the chair during highly task intensive work. To activate, push down on the forward-tilt lever, recline and then lean forward; pull up and recline to release it. Top Elevation...
Arms Arm height adjustment raises and lowers the arms to keep the user’s shoulder in a neutral posture. To change the height of the armrest, pull up on the lever and slide the armrest up or down. Side Elevation...
Page 9
Arms Armrest side-to-side adjustment accommodates users with various shoulder widths. Grasp the armrest cap and move it in or out as needed. Armrest front-to-back adjustment allows users to get close to their worksurface while maintaining effective use of the backrest. Grasp the armrest cap and move it forward or backward as needed.
Lumbar Adjustment Lumbar height adjustment allows the user to position the lumbar pad in the lumbar curve (the small) of the user’s back. Pull up on the handles to raise the lumbar pad; push down to lower it. Lumbar support helps maintain the lumbar curvature (lordosis) in the spine of the lower back when the user is seated.
Need help?
Do you have a question about the Zody and is the answer not in the manual?
Questions and answers