Iso Or H Pattern Control Switch - New Holland L213 Operator's Manual
Skid steer loader. compact track loader
Hide thumbs
Also See for L213:
- Service manual (51 pages) ,
- Service manual (51 pages) ,
- Service manual (23 pages)
Table of Contents
Advertisement
ISO or H pattern control switch
On machines with ISO or H drive, switch (1) determines
which drive system the machine is operating. ISO drive
(single lever controls drive) or H drive (traditional 2 lever
drive control).
Switching from ISO to H pattern
1. Make sure the machine is parked on level ground with
the engine running at idle, and lower the loader lift
arms to the ground.
2. Press OPERATE button (2) to stop all hydraulic func-
tions. Confirm that the AUX roller switch in right-hand
handle is in the neutral position.
NOTE: The AUX roller switch must be in neutral to
change the pattern.
3. Push and hold the ISO - H pattern select switch (1)
to desired pattern for a few seconds, an audio alarm
will sound letting you know that the pattern switch was
successful.
4. Then confirm that the control pattern switch occurred
by referencing the text display. Plus the switch will
illuminate only on the selected side.
5. Then activate the hydraulic system by pressing the
OPERATE button (2).
3 - CONTROLS AND INSTRUMENTS
3-68
1
931007504A
Advertisement
Table of Contents
Need help?
Do you have a question about the L213 and is the answer not in the manual?
Questions and answers
I accidentally push the locked button and i dont know what is the code or password for NH L225 skid steer to unlocked it
The unlock code for the New Holland L225 skid steer is the owner code or a user code that was previously set. If the code is unknown, it cannot be unlocked without the code. In that case, contact your dealer for assistance.
This answer is automatically generated
In my l220 it has a beacon switch. Is there a wire somewhere I can tire into that switch ? Like is it pre wired for a beacon