Page 2
Please cut where indicated and insert the label into the plastic pocket on the spine of the binder. SKID-STEER SKID-STEER REPAIR REPAIR LS180, LS190 LS180, LS190 Vol. 1 Vol. 1 87036989 87036989 87036997 Find manuals at https://best-manuals.com...
Page 3
Each Repair manual will be made up of one or several books. Each book will be labeled as to which sections are in the overall Repair manual and which sections are in each book. The sections listed above are the sections utilized for the LS180, LS190 Skid Steer. 87036994 7/03 2003 NEW HOLLAND NORTH AMERICA, INC.
Page 22
SECTION 55 - - ELECTRICAL SYSTEM BOOK 4 - 87036993 Chapter 1 - - Advanced Warning System, Circuits, Alternator, and Starter (Continued) CONTENTS Section Description Page Alternator Service Specifications ......... . . 55-123 Alternator System Testing and Troubleshooting .
Page 23
SECTION 82 - - FRONT LOADER (BOOM AND MOUNTING PLATE) BOOK 4 - 87036993 Chapter 1 - - Buckets CONTENTS Section Description Page 82 100 General Information ............82-2 Buckets .
Page 24
SECTION 88 - - ACCESSORIES BOOK 4 - 87036993 Chapter 1 - - Dealer Installed Options CONTENTS Section Description Page 88 100 General Information ............88-2 Adapting Attachments Requiring 12V Electrical Power .
Page 25
SECTION 90 - - PLATFORM, CAB, BODYWORK, AND DECALS BOOK 4 - 87036993 Chapter 1 - - Cab and Seat CONTENTS Section Description Page General Information ............90-2 Seat and Seat Pan Support .
Page 28
LS180 LS190 Section 00 -- General Information Section 10 -- Engine 87036990 7/03...
Page 29
Each book will be labeled as to which sections are in the overall Repair manual and which sections are in each book. The sections listed above are the sections utilized for the LS180, LS190 Skid Steer.
Models LS180 and LS190 skid steers. Use it in conjunction with the operator’s manual which is When in need of parts, always order genuine New supplied with the skid steer.
We would like to point out that “NON GENUINE” parts and accessories have not been examined and released by NEW HOLLAND. The installation and or use of such products could have negative effects upon the design characteristics of your machine and thereby affect its safety. NEW HOLLAND is not liable for any damage caused by the use of “NON GENUINE”...
SECTION 00 - GENERAL INFORMATION DANGER PRECAUTIONARY STATEMENTS The word “DANGER” denotes a forbidden practice in connection with a serious hazard. PERSONAL SAFETY Throughout this manual and on machine decals, you will find precautionary statements (“CAUTION”, Failure to follow the “CAUTION”, “WARNING”, and “WARNING”, and “DANGER”) followed by specific “DANGER”...
SECTION 00 - GENERAL INFORMATION SAFETY PRECAUTION INFORMATION battery cable. This will shut off power to the EIC and prevent damage to the EIC board or CAUTION blowing the 5-amp fuses if the board is accidentally grounded. Unsafe operating practices and improper use of the skid steer and its attachments on the part of 16.
Page 35
Headlights, warn- ing lights and smv signs are available through your new holland dealer. DANGER Fasten seat belt before starting engine! 39. Keep the skid steer clean. do not allow trash,...
SECTION 00 - GENERAL INFORMATION GENERAL SAFETY INFORMATION If an accident occurs, see a doctor immediately. Any fluid injected into the skin must be surgically removed within a few hours or gangrene may result. Doctors HANDLE FLUIDS SAFELY unfamiliar with this type of injury should reference a When you work around fuel or other flammable knowledgeable medical source.
Page 37
SECTION 00 - GENERAL INFORMATION WARNING plate. If servicing requires the complete skid steer to be in the supported position, support all four wheels Engine starting with a booster battery requires off the ground using adequate jack stands or blocks. extreme care as batteries produce explosive gases.
SECTION 00 - GENERAL INFORMATION MACHINE MODEL AND SERIAL NUMBER LOCATION The skid steer model and serial number tag is located on the right front interior of the operator’s cab at 1. ENGINE MODEL AND SERIAL NUMBER LOCATION The engine model is located on the left side of the block at 1, and the engine serial number is located at For the tightening torques for reassembly, use the following hardware torque charts unless the torque is...
Page 39
SECTION 00 - GENERAL INFORMATION MINIMUM HARDWARE TIGHTENING TORQUES IN FOOT POUNDS (NEWTON-METERS) FOR NORMAL ASSEMBLY APPLICATIONS INCH HARDWARE AND LOCKNUTS SAE GRADE 2 SAE GRADE 5 SAE GRADE 8 LOCKNUTS NOMINAL UNPLATED PLATED UNPLATED PLATED UNPLATED PLATED GR.B GR.C NOMINAL SIZE W/ZnCr...
Page 40
SECTION 00 - GENERAL INFORMATION MINIMUM HARDWARE TIGHTENING TORQUES IN FOOT POUNDS (NEWTON-METERS) FOR NORMAL ASSEMBLY APPLICATIONS METRIC HARDWARE AND LOCKNUTS CLASS 5.8 CLASS 8.8 CLASS 10.9 LOCKNUT NOMINAL CL.8 SIZE UNPLATED PLATED UNPLATED PLATED UNPLATED PLATED W/CL8.8 W/ZnCr W/ZnCr W/ZnCr BOLT 15* (1.7)
Page 41
This as a preview PDF file from best-manuals.com Download full PDF manual at best-manuals.com...
Need help?
Do you have a question about the LS180 and is the answer not in the manual?
Questions and answers
where is the blocker heater located
The block heater on a New Holland LS180 is located in section 02-07 ENGINE - BLOCK HEATER of the parts catalog.
This answer is automatically generated