HP RP9 G1 9015 Disassembly Instructions Manual

HP RP9 G1 9015 Disassembly Instructions Manual

Aio retail system
Hide thumbs Also See for RP9 G1 9015:

Advertisement

Product End-of-Life Disassembly Instructions
Product Category: Personal Computers
Marketing Name / Model
[List multiple models if applicable.]
HP RP9 G1 AiO Retail System, Model 9015
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).

1.0 Items Requiring Selective Treatment

1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
Batteries
Mercury-containing components
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Components and waste containing asbestos
Components, parts and materials containing
refractory ceramic fibers
EL-MF877-00
Template Revision B
Notes
With a surface greater than 10 sq cm
All types including standard alkaline and lithium coin
or button style batteries
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Includes background illuminated displays with gas
discharge lamps N/A
N/A
N/A
N/A
N/A
N/A
N/A
Include the cartridges, print heads, tubes, vent
chambers, and service stations. N/A
N/A
N/A
PSG instructions for this template are available at
EL-MF877-01
Quantity
of items
included
in product
1
1
0
2
0
0
0
1
0
0
0
0
0
Page 1

Advertisement

Table of Contents
loading

Summary of Contents for HP RP9 G1 9015

  • Page 1 Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
  • Page 2 Components, parts and materials containing radioactive substances 2.0 Tools Required List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed. Tool Description Tool Size (if applicable)
  • Page 3 Product view Disassembly process (Removing Back Cover) EL-MF877-00 Page 3 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 4 Disassemble the back cover by pulling Push the button on the middle bezel to Take off the rear cover, see photo 3 it upward and cover See photo 2. each side,see photo 1 Lift up the bracket,see photo 6 Disassemble the bracket by the red circle marked position and take off Disassemble the the bracket, see photo 5...
  • Page 5 Using pressing fixture to insert cable in location“2”.Routing the cable See photo3&4 Using pressing fixture to insert cable in location“ 1”.Routing the cable See photo3&4 Final cable routing for WLAN ( Fasten WIFI screw*1pcs as show in Photo 4) photo 21.5 + /-0.2Kgf.cm Screw Install the wireless card atan angle of driver: #1(Crosshead 45 degree.See photo 1...
  • Page 6 Lift up the HDD bracket horizontally Unlocking the 2 screws on the HDD and take down the HDD bracket, see bracket see photo 1(T15)3.0+/- photo 2,3 0.3kgf.cm Assemble the first SSD Card to the SSD1 mark connector, and fix the SSD card to the unit by lock the screw , see photo 3 Assemble the second SSD Card to the...
  • Page 7 Assembling the HDD bracket to the unit and lock the 2pcs screws, see photo 6 (T15)3.0+/-0.3kgf.cm Disassembly process (Do not remove the HDD cage) Assemble the first SSD Card to the Press the SSD to confirm it insert SSD1 mark(left position)connector rightly, and lock the screw to fix the SSD byone hand, and hold the on the MB, pull the Mylar aside at same...
  • Page 8 HDD Module Processing and Installing(if necessary) Do not remove the HDD cage Plug the HDD screw holder to the hold on HDD cage Remove the tape on the HDD cage See See photo 3 photo 1 Take 4 screw to lock the HDD,(#1)1.5+/-0.3kgf.cm See photo 2 Check the connector is...
  • Page 9 Unscrew the 2 screws and remove the HDD bracket See photo 1 and Take 4 screw to lock the, (#1)1.5+/- 0.3kgf.cm See photo 3 Install HDD in the unit See photo4 Check the Mylar connected to the MB Insert the HDD SATA cable to HDD rightly, see photo 6 See photo5 Disassembly process (CPU Installing)
  • Page 10 Put the CPU onto the CPU socket vertical by fixture, see photo 3 and 4 Open the CPU cover and take off the plastic cover, check whether there is PIN bend issue,See photo 2 for the bend pin Locking the CPU holder, and during this process, the CPU holder clip will drop Put the CPU onto the CPU socket from the CPU holder,take clip away from...
  • Page 11 Align the visa cover to the bracket and press the clip to lock on to the Confirm the visa cover locked well, bracket see photo1 see photo 2 and 3 Disassembly process (Installing back cover bracket) Push the rear cover to end , see picture 2 Double check the rear cover locked well, see photo 4 Align the rear cover to the unit by...
  • Page 12 Unscrew the 2 screws on the 3 dummy covers, see photo 1 and 2 Assemble the Webcam, MSR,BIO to the unit and lock the two screw red marked See Photo 4 Confirm the Webcam, MSR,BIO assembled rightly see photo 5 Put one screwdriver head into the screw hole and pull the dummy cover outward, use same method to dissemble the 3...
  • Page 13 After the MSR,Webcam, BIO assembled status,see photo 1 Disassembly process (Assemble back cover) Put the back cover to the unit See photo 1 Push it towards Assemble the back your self-direction cover to the unit, See photo 2 and lock the hook see photo 3 Double check and confirm all the hooks are locked well See photo 4...
  • Page 14 Assemble the bottom cover to the stand,See photo 1~2 Check the 6 latches on the cover are no damage, see photo 4 Assemble the bottom cover to the stand, See photo 3 Assemble the stand to the unit Lock each hook of the stand to the unit VESA cover socket, 1 to 1, 2 to2 see photo 5 EL-MF877-00...

Table of Contents