General Specifications (Structure) - Toshiba T300MV2 Instruction Manual

General Specifications (Structure)

The general specifications (structure) of the equipment are shown in the following table.
General Specifications (Structure)
Item
Applicable standard
Ambient Temperature 0 to +40°C for T300MV2
conditions
Humidity
Altitude
Installation
location
Vibration
Corrosive
factors
Paint color Cubicle
surface
Cubicle structure
Cubicle protective
structure
Air filter
IF08CZ10 April, 2019
Standard specification
UL, NEMA
-20 to +50°C for MTX series
-45 to +50°C for MTX2 series
-20 to +60°C for storage
Max 95%, no condensation
(except MTX series when heaters are
powered)
1000 m Max. above sea level
Indoors
Outdoors for MTX series
10 to 60 Hz, 0.5 G or less
Hydrogen Sulfide (H S)  0.001 PPM
2
Sulfur Dioxide (SO )  0.05 PPM
2
Chlorine gas (Cl )  0.1 PPM
2
Ammonia gas (NH )  0.1 PPM
3
Nitrogen Dioxide (NO )  0.02 PPM
2
Nitrogen Oxide (NOx)  0.02 PPM
Ozone (O )  0.002 PPM
3
Hydrochloric acid mist (HCl
ANSI 61 Gray (T300MV2)
White (MTX series)
Front maintenance (T300MV2)
MTX requires front, back, and side access
NEMA 1, Forced ventilated (T300MV2)
N3R (MTX series)
With channel base
Front mounted (T300MV2)
- 13 -
Additional optional
specification
50C operation for
T300MV2 with a
derate.
Higher altitudes
with a derate and
and special
magnetics.
3
)  0.1 mg/m
1
Consult factory for
optional colors
Remarks
Low temperature
for MTX2 is with
externally
powered heaters.
At no time should
the drive be
subjected to
conditions that
would allow
condensation to
form on the
components.
This is a list of
corrosive agents
know to attack
the drive
components.
Other agents
may also have
adverse effects
on the drive.