Pump Tubing Connections; Ap200 Connection - ABB AAO100 User Manual

Dosing Pump
AAO100

2.4 Pump Tubing Connections

2.4.1 AP200 Connection

Note. Wash tubing is not supplied. Use 6mm OD semi-rigid polyethylene tube (part no. 0212035).
Referring to Fig. 2.4:
1. Remove jetwash port sealing nut
Note. The sealing nut must be refitted if the jetwash tubing is removed.
B
2. Slide the connector
3. Push the tubing onto the jetwash port
Fig. 2.4 AP200 Connection
4
A
and retain for further use.
C
and the ferrule onto the tubing.
D
and tighten the connector to a torque of 0.6 Nm.
A
B
C
D
2 Installation
IM/DOSPMP Rev. B