Introduction; Installation; Fitting The Pump To The Reservoir - ABB AAO100 User Manual

Dosing Pump
AAO100

1 Introduction

The AAO100 dosing pump is used to introduce a cleaning
solution to the jetwash of an AP200 pH system at preset
intervals. The timing, duration and amount of cleaning is
controlled by the AX400 pH analyzer.
AAO100 Dosing
Pump
Reservoir
(water or cleaning
solution)
Fig. 1.1 Jetwash Schematic
The AP200 jetwash system enables automatic cleaning of both
the measuring element and the reference junction by spraying
water or a cleaning solution at them in situ, thus reducing
system maintenance requirements.
Maintenance
Cleaning
Screw
Fig. 1.2 Location of the Jetwash Nozzles
2
AX400
Analyzer
Level Sensor
Twin Wash Nozzles

2 Installation

Note. Installation must be carried out in accordance with
local water company and council by-laws.

2.1 Fitting the Pump to the Reservoir

Referring to Fig. 2.1, secure the pump to the reservoir using the
A
two screws provided.
A
Fig. 2.1 Fitting the Pump to the Reservoir
1 Introduction
IM/DOSPMP Rev. B