NEC UNIVERGE SL2100 Manual page 14

UNIVERGE SL2100 Release 1.8 Overview
3.2.4 Technical Information
Easy Edit
This can be accessed via copying and pasting to search the following link:
Advanced Items > VoIP > Extensions > SIP Extensions > SIP Extension TLS Settings > SIP Extension TLS
Basic Setup
TLS Registrar/Proxy Port - Set the port to use for the TLS Protocol. Permitted values 0-65535 (Def: 0,
disabled).
Server Certificate - Enter the Server certificate file name, this will be a .pem file, so entry will be
xxxxxxx.pem where xxxxxxx would become the filename to use. Further details later in this section.
Private Key - Enter the Private key file name, this will be a .key file, so entry will be xxxxxx.key where
xxxxxx would become the filename to use. Further details later in this section.
sRTP Mode - Check the SRTP Mode box to enable SRTP (def: Disabled)
- While SRTP Mode is effective, the upper limit value of the VoIP resource decreases.
- When the user changes SRTP Mode setting the VoIPDB is reset.
For further details on SRTP see later in this section.
Alarm Type - Select the alarm level – Not Set, Major, Minor.
Report - Check the box for Report if you wish the TLS errors to be reported (see Maintenance later in
this section for details of alarms)
 Copyright 2019 NEC Enterprise Solutions
14 of 34
Exclusively for use by NEC Enterprise Solutions channel partners
All rights are reserved. Reproduction whole or in part is prohibited without the written consent of the copyright owner.