NEC UNIVERGE SL2100 Manual page 10

UNIVERGE SL2100 Release 1.8 Overview
System Item name
Data Item
10-76-01 Push Notification Service Basic Setup - Domain Name
Set Domain Name of Push Proxy Server. Do not change
default entry unless there are additional instructions. If
HTTPS Proxy Server is not used in Program 10-76-04,
setting DNS server (Program 10-1213, 10-12-14) is
required for IP address resolution.
10-76-02 Push Notification Service Basic Setup - Access Key
Do not change default entry unless there are
additional instructions.
This Program can be set from PCPro only.
10-76-03 Push Notification Service Basic Setup - Server
Certificate
Enter the server certificate file name.
10-76-04 Push Notification Service Basic Setup - HTTPS proxy
server address
Set HTTPS Proxy Server Address
10-76-05 Push Notification Service Basic Setup - HTTPS proxy
server port
Set HTTPS Proxy Server Port Number
24-02-15 SIP Out of Range Timer
When not receiving any response within this timer
setting, system determines SIP terminal is out of
range. With default value, the SIP terminal with Push
Proxy enable may be unable to receive a call because
this timer is short. Set time according to the
customer's external network environment.
 Copyright 2019 NEC Enterprise Solutions
10 of 34
Exclusively for use by NEC Enterprise Solutions channel partners
All rights are reserved. Reproduction whole or in part is prohibited without the written consent of the copyright owner.
Input Data Default Value
0-65535 nld01.nec-pushproxy.com
A2Hi123s>Y=RBx4u5DIt7
wO9?70M<2@JMsCD8QE
0-65535
rFX:N96GyDBLsK6NsJZ;P2
0: Not Allow
1: Allow
0.0.0.0 -
255.255.255.255
0-65535
0 - 30 sec
V63
0: Not Allow
0.0.0.0
8080
4