Mitsubishi Electric MELIPC MI5000 Series User Manual page 152

5.
Press the OK switch (5).
6.
The MAIN RUN LED turns on and Windows recovery is run.
During recovery, the state of the dot matrix LED of this product is as follows.
• Recovery start: 'Ready' is displayed.
• Running: 'Running' is displayed.
• Recovery completed: 'OK' is displayed.
An error occurred if other text appears on the dot matrix LED. ( Page 150 If an error ends recovery)
7.
Make sure that recovery is completed, and then turn the power supply OFF to ON or reset this product.
At completion of recovery, the MAIN RUN LED turns off.
If an error ends recovery
If an error occurs during recovery, the MAIN LED turns off and the MAIN ERR LED turns on when the error is detected.
An error code corresponding to the diagnosis for which the error occurred is displayed on the dot matrix LED. A system error
occurred if an error code is not displayed on the dot matrix LED, and only the MAIN ERR LED is flashing.
Dot matrix LED Description
display
1201 Check disk error
(The CFast card may be corrupted.)
1202 Format error
(The CFast card may be corrupted.)
1203 Recovery execution error
(Possible product fault.)
APPX
150
Appendix 8 Recovery of Windows
(5)
Corrective action
Recover Windows again. If an error is detected at this time, this
product may be malfunctioning. Consult your local Mitsubishi
representative.