Ceiling Mount - Ubiquiti UniFi nanoHD UAP-nanoHD Quick Start Manual

Ceiling Mount

1. Remove the ceiling tile.
2. Place the Ceiling Backing Plate in the center of the ceiling
tile. Mark the four mounting screw holes.
3. Mark a hole approximately 18 mm in diameter for the
Ethernet cable feed.
Note:
bottom mounting hole to the center of the cable hole.
4. Use a 3 mm drill bit to drill the screw holes, and cut or drill
the hole for the Ethernet cable feed.
25 mm is the distance from the center of the
25 mm