Advertisement
Quick Start Guide
Video Doorbell 2K (Wired)
Anker Innovations Limited. All rights reserved. eufy Security and eufy Security
Logo are trademarks of Anker Innovations Limited, registered in the United
States and other countries. All other trademarks are the property of their
respective owners.
51005001514 V03
Advertisement
Related Manuals for eufy Security T8200
Summary of Contents for eufy Security T8200
- Page 1 Quick Start Guide Video Doorbell 2K (Wired) Anker Innovations Limited. All rights reserved. eufy Security and eufy Security Logo are trademarks of Anker Innovations Limited, registered in the United States and other countries. All other trademarks are the property of their respective owners.
-
Page 2: Table Of Contents
Table of Content What’s in the Box What’s Required for Installation How the System Works EufySecurity App Installation Video Doorbell Installation Safety Customer Service English 01... -
Page 3: What's In The Box
Screw Hole Mounting Bracket 15° Mounting (Wired) Positioning-Card (Attached to 15° Wedge (Optional) Model: T8200 Mounting Wedge) FCC ID: 2AOKB-T8200 Doorbell Chime IC: 23451-T8200 Extension Wires and Jumper for Existing Screw Packs (Anchors Doorbell Wire Nuts (Optional) Chime (The second... -
Page 4: Eufysecurity App Installation
EufySecurity App Installation Video Doorbell Installation Search keyword "EufySecurity" on App Store or Google Play and install the App on your phone. Note: Make sure you have installed the EufySecurity App and scan the QR code before start handling the doorbell installation. Step 1 Ring the existing doorbell, make sure it’s working and locate the place of your existing chimes in the house. - Page 5 Step 3 Step 4 Find the doorbell chime in your house, then remove the cover and find the screw terminals with Remove the existing doorbell button at the front door. Pull the two wires out carefully when TRANS and FRONT markings. Use the provided jumper for existing chime to connect the two removing the old doorbell.
- Page 6 Optional: Use the 15° mounting wedge as a supplementary mounting bracket if you wish to see Step 5 more on a specific side. Determine the mounting position of the doorbell. Check if you can reuse the existing holes on the wall.
- Page 7 Screw Packs (Anchors Phillips-Head Screwdriver (Attached to 15° Mounting Wedge) Wedge (Optional) are optional) (User provides it.) Video Doorbell 2K (Wired) Extension Wires and Phillips-Head Screwdriver Model: T8200 Wire Nuts (Optional) (User provides it.) Mounting Mounting Mounting Wall Wall Wedge...
- Page 8 Use the doorbell detaching pin provided if you wish to detach the doorbell from the mounting Bracket. Step 9 Press and hold the hole on the bottom of the doorbell and then lift its bottom to take it off. There are 2 thermal conductive pads on the mounting bracket. They're used to conduct heat from The detaching pin has magnet pad on the black-color side.
- Page 9 Step 10 Step 12 Follow the on-screen instructions in EufySecurity App. Install the doorbell power pin to the doorbell Switch the master circuit breaker in your house back to ON. chime and then pair it to your video doorbell. Note: One video doorbell can link up to 4 electronic chimes. Use the volume and music buttons on the side of the electronic chime to adjust the volume and ringtone.
-
Page 10: Safety
Lors de l'utilisation du produit, maintenez une distance de 20 cm du corps afin de vous conformer Device under strong sunshine or too wet environment. aux exigences en matière d'exposition RF. The suitable temperature for T8200 is -20°C-50°C. The suitable temperature for T8740 is 0°C-45°C. 16 English... -
Page 11: Customer Service
Customer Service • Warranty 12-month limited warranty • Call Us United States +1 (800) 988 7973 Mon-Fri 9AM-5PM (PT) United Kingdom +44 (0) 1604 936 200 Mon-Fri 6AM-11AM (GMT) Germany +49 (0) 69 9579 7960 Mon-Fri 6:00-11:00 • Email Us Customer Support: support@eufylife.com Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong...
Need help?
Do you have a question about the T8200 and is the answer not in the manual?
Questions and answers