Luxair LA-60-1100 STD Operating And Installation Instructions page 12

Cooker hoods that are not to be vented to outside walls
Fitting the filters on standard or round hoods is as follows.
Offer the round filter to the side of the motor housing, twist clockwise slowly
until you feel the filter sit, then twist clockwise until you feel it lock! Reverse the
process to remove.
two months, failure to replace these filters will result in the warranty been void.
For replacement filters please visit our web site at
www.luxairhoods.com
12
Please note that the charcoal filters will need replacing every
Please note that if the hood is
not to be vented to an outside
wall, the top section of the hood
with the vents must be used,
this allows the filtered air back
into the room. Failure to do so
will result in the hood been
noisy and will cause it to
vibrate; this will also void the
warranty if this section is not
used when installed in
recirculation mode.
Note that when the hood is not
vented to an outside wall,
charcoal filters must be used in
conjunction with the above vent
system, image shows how to fit
the filters to a standard hood,
see page 21 and 23 for further
instructions and other models.