Cleaning The Air Filter - Sony VPL-CX100 Operating Instructions Manual

Cleaning the Air
Filter
The air filter should be cleaned whenever
you replace the lamp.
Remove the air filter, and then remove the
dust with a vacuum cleaner.
The time needed to clean the air filter will
vary depending on the environment or how
the projector is used.
1
Turn the power off and unplug the
power cord.
2
Remove the air filter cover.
3
Remove the air filter from the each
claws (7 positions) on the air filter
cover.
4
Clean the air filter with a vacuum
cleaner.
5
Attach the air filter so that it fits into
the each claws (7 positions) on the air
filter covers.
48

Cleaning the Air Filter

6
Notes
• If the dust cannot be removed from the air
filter, replace the air filter with a new one.
For details on new air filter, consult with
qualified Sony personnnel.
• Be sure to attach the air filter cover firmly;
the power can not be turned on if it is not
inserted securely. (Page 51)
• To erase a message, press any key on the
control panel of the projector or on the
remote commander.
Claws
Note
There is a difference between the front and
rear of the air filter. Attach the air filter
with the grid side facing upward as in the
illustration.
Replace the air filter cover.