The Set Setting Menu - Sony VPL-CS1 Operating Instructions Manual

Sony operating instructions lcd data projector vpl-cs1
Hide thumbs Also See for VPL-CS1:
Table of Contents

Advertisement

Available languages

Available languages

About the Preset Memory No.
This projector has 37 types of preset data for
input signals for INPUT-A (the preset
memory). When a preset signal is input, the
projector automatically detects the signal
type and recalls the data for the signal from
the preset memory to adjust it to an optimum
picture. The memory number and signal type
of that signal are displayed in the INPUT
SETTING menu. You can also adjust the
preset data through the INPUT SETTING
menu.
This projector has 20 types of user memories
for INPUT-A into which you can save the
setting of the adjusted data for an unpreset
input signal.
When an unpreset signal is input for the first
time, a memory number is displayed as 00.
When you adjust the data of the signal in the
INPUT SETTING menu, it will be
registered to the projector. If more than 20
user memories are registered, the newest
memory always overwrites the oldest one.
See the chat on page 39 to find if the signal
is registered to the preset memory.
Since the data is recalled from the preset
memory about the following signals, you
can use these preset data by adjusting SIZE.
Make fine adjustment by adjusting SHIFT.
Signal
Memory No. SIZE
Super Mac-2
23
SGI-1
23
Macintosh 19"
25
Macintosh 21"
28
Sony News
36
PC-9821
36
1280
1024
WS Sunmicro
37
Note
When the aspect ratio of input signal is other
than 4:3, a part of the screen is displayed in
black.
The SET SETTING
Menu
The SET SETTING menu is used for
changing the settings of the projector.
SET SETTING
Menu Items
STATUS (on-screen display)
Sets up the on-screen display.
ON: Shows all of the on-screen displays.
OFF: Turns off the on-screen displays
except for the menus, a message when
turning off the power, and warning
messages.
INPUT-A
Selects the RGB or component signal input
from the INPUT A connector.
1312
1320
Note
If the setting is not correct, "Please check
1328
INPUT-A setting." appears on the screen and
1456
the color of the picture becomes strange or the
picture is not displayed.
1708
1600
KEYSTONE MEMORY
Memorizes the data adjusted with DIGITAL
1664
KEYSTONE.
INPUT-A
STATUS:
ON
INPUT-A:
RGB
KEYSTONE MEMORY: OFF
DIGITAL KEYSTONE:
OFF
LANGUAGE:
ENGLISH
POWER SAVING:
OFF
SIRCS RECEIVER: FRONT&REAR
LAMP TIMER:
00010h

The SET SETTING Menu

GB
27

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vpl cs1 - sxga lcd projector

Table of Contents