When you use a PS/2 mouse port
Rear side
AUDIO
MOUSE
PS/2 Mouse cable (supplied)
Stereo audio connecting cable (not supplied)
To connect a Macintosh computer
Use an ADP-20 signal adapter (not supplied). In this case, however, you can
not control the mouse of the computer by the Remote Commander.
Connecting with a VCR or 15k RGB/Component Equipment
This section describes how to connect the projector to a VCR and 15k RGB/
component equipment.
For more information, refer to the instruction manuals of the equipment you
are connecting.
To connect a VCR
Rear side
AUDIO
MOUSE
Stereo audio
connecting
cable (not
supplied)
1)
When both the S VIDEO and VIDEO jacks are connected to the external equipment,
the input signal from the S VIDEO jack is selected.
VIDEO
S VIDEO
INPUT A
HD D-sub
15-pin cable
(supplied)
VIDEO
S VIDEO
INPUT A
S-Video cable (not supplied)
Video cable (not supplied)
to monitor output
to mouse port (PS/2)
to audio output
to video
to audio
output
output
VCR
Connecting the Projector
Computer
to S video
1)
1)
output
GB
17