Page 1
Koninklijke Philips Electronics N.V. or their respective owners. TP Vision Netherlands B.V. reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. PHILIPS and the PHILIPS’ Shield Emblem are used under license from Koninklijke Philips Electronics N.V.
Page 3
Technical Specs, Diversity, and Connections TPN16.3E LA EN 3 Connections Rear Connectors Side Connectors HDM I2 HDMI 1 AUDIO IN VGA / DVI S CART (RGB/CVBS) TV ANTENNA SERV .U (Optional) 20210_001.eps Figure 2-1 Connection overview Note: The following connector colour abbreviations are used 5 - PC IN:VGA (acc.
Page 4
EN 4 TPN16.3E LA Technical Specs, Diversity, and Connections - Shield 8 - Cinch: Digital Audio - Out - D1- Data channel BK - Coaxial 0.4 - 0.6V / 75 W - D0+ Data channel - Shield 9 - Service / UART - D0- Data channel - Ground...
Spare Parts the following points: • Route the wire trees correctly and fix them with the For the latest spare part overview, consult your Philips Spare mounted cable clamps. Part web portal. • Check the insulation of the Mains/AC Power lead for external damage.
Page 6
EN 6 TPN16.3E LA Precautions, Notes, and Abbreviation List result in sets which have the same CTN (Commercial Type 6 = play 16 : 9 format, 12 = play 4 : 3 Number; e.g. 28PW9515/12) but which have a different B.O.M. format number.
Page 7
6.5 MHz. L' is Band (VESA standard for communication I, L is all bands except for Band I channel and display). Using E-DDC, LG.Philips LCD (supplier) the video source can read the EDID Loudspeaker information form the display.
Page 8
SOPS Self Oscillating Power Supply Serial Peripheral Interface bus; a 4-wire synchronous serial data link standard S/PDIF Sony Philips Digital InterFace SRAM Static RAM Service Reference Protocol Small Signal Board Spread Spectrum Clocking, used to reduce the effects of EMI...
Mechanical Instructions TPN16.3E LA EN 9 4. Mechanical Instructions Index of this chapter: 4.6 Set Re-assembly 4.1 Cable Dressing Notes: 4.2 Service Positions • Figures below can deviate slightly from the actual situation, 4.3 Assembly/Panel Removal ( for 22"/24"4031 series) due to the different set executions.
EN 12 TPN16.3E LA Mechanical Instructions ECN701 CN8101 CN9301 MAIN POWER SUPPLY CN701 CN408 (1054) (1053) CN601 CN01 ECN401 LOUDSPEAKER LOUDSPEAKER (1184) (1184) IR/LED BOARD CN201 (1056) 20210_105.eps Figure 4-6 Cable dressing (49" 4131 series) back to 2016-Oct-28 div. table...
Page 13
Mechanical Instructions TPN16.3E LA EN 13 Service Positions 4.3.1 Rear Cover For easy servicing of a TV set, the set should be put face down on a soft flat surface, foam buffers or other specific workshop Refer to Figure 4-7 for details.
Page 14
EN 14 TPN16.3E LA Mechanical Instructions 20210_107.eps Figure 4-8 Speakers removal 4.3.3 IR/LED Board Refer to Figure 4-9 for details. Step 1 Caution: IR/LED Board sitting at the bottom BC, please be careful to avoid demage during removal of Back cover. 1.
Page 15
Mechanical Instructions TPN16.3E LA EN 15 4.3.4 Small Signal Board (SSB) 4.3.5 Power Supply Unit (PSU) Refer to Figure 4-10 for details. Caution: it is mandatory to remount all different screws at their Caution: it is mandatory to remount all different screws at their original position during re-assembly.
Page 16
EN 16 TPN16.3E LA Mechanical Instructions 4.4.2 Rear Cover 1. At the indicated areas [5] the cover is securd by clips. Be very careful with releasing those. 2. Gently lift the rear cover from the TV. Make sure that wires Refer to Figure 4-12 for details.
Page 17
Mechanical Instructions TPN16.3E LA EN 17 4.4.3 Speaker 2. Release the connectors [2] and [3] that connect speake with the SSB. Refer to Figure 4-13 for details. 3. Gently lift the Speaker from the TV. Make sure that wires Refer to Figure 4-13 for details.
Page 18
EN 18 TPN16.3E LA Mechanical Instructions 4.4.5 IR/LED Board 4.4.6 Power Supply Unit (PSU) Refer to Figure 4-15 for details. Caution: it is mandatory to remount all different screws at their 1. Remove the area clips [1] from the stand bracket, pull out original position during re-assembly.
Page 19
Mechanical Instructions TPN16.3E LA EN 19 4.5.2 Rear Cover 1. Remove the fixation screws [2] and [3] that secure the rear cover. Refer to Figure 4-17 for details. 2. Gently lift the rear cover from the TV. Make sure that wires Refer to Figure 4-17 for details.
Page 20
EN 20 TPN16.3E LA Mechanical Instructions 4.5.4 Small Signal Board (SSB) Refer to Figure 4-19 for details. Caution: it is mandatory to remount all different screws at their original position during re-assembly. Failure to do so may result in damaging the SSB. 1.
Service Modes, Error Codes, and Fault Finding TPN16.3E LA EN 21 5. Service Modes, Error Codes, and Fault Finding Index of this chapter: Display Option Code Selection 5.1 Service Modes When after an SSB or display exchange, the display option 5.2 Stepwise Start-up code is not set properly, it will result in a TV with “no display”.
Page 22
EN 22 TPN16.3E LA Service Modes, Error Codes, and Fault Finding Table 5-1 SAM mode overview Main Menu Sub-menu 1 Sub-menu 2 Description System Information Op Hour e.g. 00082 This represents the life timer. The timer counts normal operation hours, but does not count Stand-by hours.
Page 23
Service Modes, Error Codes, and Fault Finding TPN16.3E LA EN 23 Default value Item Item value 22" 24" 32" 43" 49" Description VIRGING_MODE Use this to return the set to virgin mode. Depends whether the set has been used already. E_Fuse E-fuse mode ORT_MODE...
Page 24
EN 24 TPN16.3E LA Service Modes, Error Codes, and Fault Finding Specifications • Ignore “Service unfriendly modes”. • Line number for every line (to make CSM language independent). • Set the screen mode to full screen (all contents on screen is visible). •...
Page 25
Service Modes, Error Codes, and Fault Finding TPN16.3E LA EN 25 Stepwise Start-up Standby Soft Mode Command Received, Switch previously in Standby Off(Mains Soft Mode (Power tact Standby Power Plug) switch) Digital Digital background background tasks started tasks completed TV Wakeup commands Received Standby...
Once the upgrade is finished, use the PC to remove the TV stand alone set. A description on how to upgrade the main software from the USB portable memory. software can be found in the DFU or on the Philips website. 5.4.6 Content and Usage of the One-Zip Software File 5.4.2...
Service Modes, Error Codes, and Fault Finding TPN16.3E LA EN 27 Error Codes 5.5.2 How to Read the Error Buffer 5.5.1 Introduction You can read the error buffer in three ways: • On screen via the SAM/CSM (if you have a picture). Example: Error codes are required to indicate failures in the TV set.
EN 28 TPN16.3E LA Service Modes, Error Codes, and Fault Finding The Blinking LED Procedure 5.7.3 No Picture 5.6.1 Introduction When you have no picture, first make sure you have entered the correct display code. See paragraph 6.4 Option Settings the instructions.
Normal (9000K) 22PFS4031/12 61.25 MHz (channel 3). 22PFT4031/05 • LATAM models: an NTSC M TV-signal with a signal 22PFT4031/12 strength of at least 1 mV and a frequency of 22PFT4031/60 61.25 MHz (channel 3). 24PHS4031/12 91 24PHT4031/05 92 24PHT4031/12 93 6.3.1...
Cool (11000K) 22PFS4031/12 transmitter: “062598” directly followed by MENU and “xxx”, 22PFT4031/05 where “xxx” is a 3 digit decimal value of the panel type: see 22PFT4031/12 column “Display Code” in Table 6-3. After resetting the Display 22PFT4031/60 Code, restart the set immediately.
Page 31
Alignments TPN16.3E LA EN 31 Also the virgin bit is to be set. To set all this, you can use the “NVM editor” and “Dealer options” items in SAM (do not forget to “store”). After a repaired SSB has been mounted in the set (set repair on board level), the type number (CTN) and production code of the TV has to be set according to the type plate of the set.
EN 32 TPN16.3E LA Circuit Descriptions 7. Circuit Descriptions Index of this chapter: Introduction 7.1 Introduction The TPN16.3E LA is a new chassis launched in Europe in 7.2 Power Supply 2016. The whole range is covered by NT72453. 7.3 DC/DC Converters The major deltas versus its predecessor support DVB-TC;...
Page 33
The following displays can be distinguished: specifications! This part is available in the regular market. • CCFL/EEFL backlight: power panel is conventional IPB Consult the Philips Service web portal for the order codes of the • LED backlight: boards. - side-view LED without scanning: PSL power panel - side-view LED with scanning: PSLS power panel Important delta’s with the TPN16.3E LA classis platform are:...
Page 34
EN 34 TPN16.3E LA Circuit Descriptions 7.2.3 Connector overview Table 7-1 Connector overview Connector Number CN9101 CN8605 CN9101 CN8602 CN9101 CN8601 Description to SSB to panel to SSB to panel to SSB to panel +VLED +VLED +VLED BL_O/F +VLED BL_O/F +VLED BL_O/F n.c.
Page 35
Circuit Descriptions TPN16.3E LA EN 35 7.3.1 Power layout SSB C626 PVDD(12V) L704,DV33 L703, +5V_STB L701, DV11 C764, Panel_VCC U203, +3V3_Tuner U102, VCC_CI 20210_203.eps Figure 7-4 Power SSB Top View back to 2016-Oct-28 div. table...
Page 36
EN 36 TPN16.3E LA Circuit Descriptions C1301,+5V_SW 20210_204.eps Figure 7-5 Power SSB Bottom View Front-End Analogue and DVB-T, DVB-C; ISDB-T reception ST42CS-2-E 7.4.1 DVB-C part The Front-End for DVB-T/C DTV part consist of the following IF_AGC IF_AGC key components: • TUNER EUROPE system ST42CS-2-E •...
Page 37
Circuit Descriptions TPN16.3E LA EN 37 7.4.2 DVB-T2 DTV part HDMI Refer to figure 7-9 HDMI input configuration for the application. The Front-End for DVB-T2 DTV part consist of the following key components: • TUNER EUROPE system ST42CS-2-E • SCALER NT72562TBG-BB/D HS-LFBGA-510 NT72562TBG Below find a block diagram of the front-end application for DVB-T2 DTV part.
Page 38
EN 38 TPN16.3E LA Circuit Descriptions The integrated video ADC and video decoder support PC VGA port, YPbPr, SCART, CVBS and S-Video Input. Regarding the tuner input, the digital VIF performs the universal analog TV demodulation (NTSC, PAL, and SECAM), including IF processing, AGC, video demodulation, and second sound IF generation (SSIF).The video decoder supports universal TV video format.
IC Data Sheets TPN16.3E LA EN 39 8. IC Data Sheets This chapter shows the internal block diagrams and pin configurations of ICs that are drawn as “black boxes” in the electrical diagrams (with the exception of “memory” and “logic” ICs).
Page 41
IC Data Sheets TPN16.3E LA EN 41 Diagram 10-5-11 SPK AMP/HP OUT, B11, AD87588 (IC U601) Block diagram AD87588 Pinning information 19790_301.eps Figure 8-3 Internal block diagram and pin configuration back to 2016-Oct-28 div. table...
Page 42
EN 42 TPN16.3E LA IC Data Sheets Diagram 10-5-16 BT, B16, AD22650 (IC U602) Block diagram AD22650 Pinning information TSSOP-14 (Top View) LINP RINP LINN RINN OUTL OUTR SGND PGND PVDD PVSS 20210_301.eps Figure 8-4 Internal block diagram and pin configuration back to 2016-Oct-28 div.
Page 43
Block Diagrams TPN16.3E LA EN 43 9. Block Diagrams Block diagram HSBGA-511 CVBS LVDS PANEL (MIX) SCART RGB/CVBS DVBS2 Demod EJTAG Debug DVBT/T2 UART UART PCMICA Card x 1 8 bit NAND STBC HDMI x 2 HDMI FLASH USB x 1 SCART DDR3 HP-AMP...
Page 44
Circuit Diagrams and PWB Layouts TPN16.3E LA EN 44 10. Circuit Diagrams and PWB Layouts 10.1 A 715G7735 PSU 10-1-1 Power POWER Cold BD9901 R8612 C8605 KBP208G-C L8601 NC/22K 1% NC/100PF 500V NC/47UH FB9903 FB9905 D8601 BEAD VLED+ FB9906 BEAD SR510-22 +24V_AL T9101...
Page 45
Circuit Diagrams and PWB Layouts TPN16.3E LA EN 45 10-1-2 Power layout top D8601 CN9101 L8602 L8601 CN8601 R8604 J912 D9108 CN8605 C8601 J908 J909 J907 J906 J911 CN8603 J904 L9101 C9115 IC9102 J903 D9106 C9117 HS9101 C9106 Q9102 C9103 Q9101 C9118 T9101...
Page 46
Circuit Diagrams and PWB Layouts TPN16.3E LA EN 46 10-1-3 Power layout bottom R9145 C8613 C8603 R8613 R9131 C9108 C9113 R9105 R9144 R9137 C9121 R9113 R9116 R9121 R9111 R9129 R9107 R9130 R9108 R9119 R9110 R9109 R9104 R9135 2016-04-27 715G7735 LAYOUT BTM 20210_502.eps back to 2016-Oct-28...
Page 47
Circuit Diagrams and PWB Layouts TPN16.3E LA EN 47 10.2 A 715G7734 PSU 10-2-1 Power POWER +18V BD9901 NC/KBJ608G-FUC BD9902 GBL408-C D9110 D9109 SR510-22 SR34H ZD9101 +12V_A BZT52-B22 D9111 +12VS SR510-22 R9130 Q9306 1K OHM L9101 D9112 NC/P1604ED SR510-22 +12V NR9901 C9101 R9302...
Page 48
Circuit Diagrams and PWB Layouts TPN16.3E LA EN 48 10-2-2 LED Driver LED DRIVER R8615 C8617 22K 1/4W 100PF 500V +18V FB8605 L8602 BEAD VLED+ 47uH D8601 C8601 C8605 SR506 330UF 35V 0.1uF 50V C8621 R8612 R8611 C8623 D8602 0.1uF 50V 100K 1N4148 R8616...
Page 49
Circuit Diagrams and PWB Layouts TPN16.3E LA EN 49 10-2-3 Power layout top CN8602 FB9906 BD9901 Q9101 NR9901 C9908 BD9902 HS9101 C9105 C9126 FB8605 C9102 C9902 R9101 L9903 R8601 C9113 J9102 C9903 FB9908 J9106 C8601 L9901 J9120 L8602 T9101 C9801 J9107 R9907 J9108...
Page 55
Circuit Diagrams and PWB Layouts TPN16.3E LA EN 55 10.4 A 715G7574 PSU 10-4-1 AC input AC input HS9801 H O T HS9901 BD9901 C O L D TS10K80-01 R9128 +12V 100 OHM 1/4W D9802 D9803 C9114 R9142 Q9108 470UF 25V 100KOHM +-5% 1/8W R9111 AOD4185...
Page 56
Circuit Diagrams and PWB Layouts TPN16.3E LA EN 56 10-4-2 Power layout top CN9101 CN8603 J909 J901 J903 J905 HS9111 C9310 C9114 J917 J907 D9121 D9111 C8601 FB9301 L9301 L8602 J921 J913 C9121 C9122 C9111 L9100 C8608 C8609 D8601 J930 C9123 HS8601 C9112...
Page 58
Circuit Diagrams and PWB Layouts TPN16.3E LA EN 58 10.5 B 715G8232 SSB 10-5-1 System Power System POWER Backlight ON/OFF Control DV33 AUDIO_12V AUDIO_12V 14 NC/1K PWR_12V PWR_12V 13,17 +5V_STB R738 +5V_STB DC POWER INPUT +5V_SW +5V_SW 9,11,13,16,17,18,19 DV33SB +5V_STB 100OHM DV33 DV33...
Page 77
Circuit Diagrams and PWB Layouts TPN16.3E LA EN 77 10-6-2 IR&LED board layout Layout LED Board (top side) LED1 Layout LED Board (bottom side) 2012-10-26 LED Board 715G5964 layout top/bottom 19790_518.eps back to 2016-Oct-28 div.table...
Circuit Diagrams and PWB Layouts TPN16.3E LA EN 78 10.7 J 715G8009 IR/LED Panel 10-7-1 IR & LED & Light Sensor IR & LED & Light Sensor Light Sensor St andby LED 3V3SB CN201 LED_R DVD3V3 DVD3V3 C222 NC/ 1uF 10V RC-IR R201 R224...
Page 79
Circuit Diagrams and PWB Layouts TPN16.3E LA EN 79 10-7-2 IR/LED board layout Layout IR/LED panel (top side) CN201 U201 Q201 Layout IR/LED panel (bottom side) R224 R223 LED201 2015-08-27 IR/LED panel 715G8009 layout top/bottom 20050_527.eps back to 2016-Oct-28 div.table...
Page 81
Circuit Diagrams and PWB Layouts TPN16.3E LA EN 81 10-8-2 IR/LED board layout Layout LED Board (top side) Q301 U201 Layout LED Board (bottom side) CN201 2012-10-26 LED Board 715G7055 layout top/bottom 19791_501.eps back to 2016-Oct-28 div.table...
Page 82
Circuit Diagrams and PWB Layouts TPN16.3E LA EN 82 10.9 E 715G7088 Keyboard control panel 10-9-1 CN01 CN01 KEY1 CONN CONN 0.1uF 50V 0.1uF 50V TACT SW 6P TACT SW 6P SW01 SW01 Right Center Down Left 2014-05-28 Keyboard control panel 715G7088 19791_502.eps back to...
Page 83
Circuit Diagrams and PWB Layouts TPN16.3E LA EN 83 10-9-2 Key board layout Layout Keyboard control panel (top side) SW01 Layout Keyboard control panel (bottom side) 2014-06-06 Keyboard control panel 715G7088 layout top/bottom 19791_503.eps back to 2016-Oct-28 div.table...
Need help?
Do you have a question about the 22PFT4031/12 and is the answer not in the manual?
Questions and answers