Table of Contents
Advertisement
Available languages
Available languages
Filter
We recommend cleaning the filter every month.
DW9900R_DD68-00209B-00_EN.indd 43
1. Open the door, and then remove the
lower rack.
2. Turn the filter handle counterclockwise
to unlock the filter cover.
3. Remove the filter cover, and then the
cylindrical micro filter underneath.
English 43
12/29/2018 2:09:55 PM
- Quick Links:
- Checking Parts
- Control Panel
- Troubleshooting
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the DW80R9950US and is the answer not in the manual?
Questions and answers
when using the self clean cycle do you add soap
Does the dish washer heat the water when set to express 60
Yes, the Samsung DW80R9950US dishwasher heats the water when set to Express 60. The rinse temperature for the Express 60 cycle is specified as 149°F (65°C).
This answer is automatically generated
need parts bdg3-00309a & dd97-00509a
What are the correct steps for removal and installation of the Slide Rack Holder pn DD61-00497a on the Samsung DW80R9950US/AA00? Before I pack it full of Tannerite.
To remove and install the Slide Rack Holder on the Samsung DW80R9950US:
1. Place your finger on the lower area of the 3rd rack holder rail.
2. Push the holder handle in the direction of the arrow marks to release and remove the holder.
3. Repeat the process on the other side to fully remove the holder.
4. Remove the 3rd rack from the dishwasher.
5. To reinstall, reverse the removal steps.
6. Ensure the hook-shaped part of the holder faces downward when reinserting it into the rail.
This answer is automatically generated
@Mr. Anderson
@ROBERT LOOS Mr. Anderson, I am working on the Middle Basket, it has the spinner mounted underneath. Part #DD61-00497A is installed below and just inside of the Orange Height adjustment handle. Can you please tell me how to Remove and Install this part?
Accidentally pushed delay start. How do I remove this as I want to start immediately
To cancel the delay start on a Samsung DW80R9950US dishwasher and start it immediately:
1. Press the Cancel button to stop the current delayed cycle.
2. Turn off the dishwasher.
3. Turn the dishwasher back on.
4. Select your desired cycle without setting a delay.
5. Press the START button.
6. Close the door to begin the cycle immediately.
This answer is automatically generated