Aim MyChron Light TG Technical Documentation

TECHNICAL DOCUMENTATION
Notes: MyChron Light TG technical documentation, dimensions and pinout – Version 1.04
Introduction
MyChron Light TG represents the evolution of MyChron light MCL. This new,
easy to use, lap timer provides the driver (Auto Moto installations only) with a
new, handy, plug and play instrument. The new MyChron Light TG has a new,
beautiful 128 x 64 pixels graphic display and a ± 45° visual angle. This new lap
timer has also an auto power off feature after 20 minutes of inactivity.
The instrument is composed of two parts:
Your MyChron Light TG has:
The gauge is powered with two 3 V round internal batteries, but You can also
have (optional) an external powered version: 7-15 V external power.
MyChron Light TG standard version has a green display, but an optional version
with backlight (the one with external power) and blue display is also available.
Data is stored in the 128 Kbytes non- volatile internal memory and is downloaded
to a PC through an optional USB cable. Data stored will be analyzed thanks to a
new properly designed and developed software called "Light Analyzer".
Installation notes
Technical Documentation:
Figure 1: MyChron Light TG and its IR receiver
• MyChron Light TG display unit
• IR receiver
• built in clock and calendar
• built in database for laps management
• capability of up to 1200 laps storage
• MyChron Light TG internal power is a plug and play instrument. You
only have to configure it (see configuration paragraph). If, on the contrary,
You decide to buy an externally powered version, You have to connect
power cable to an external 7-15 V power source (the car/ bike battery for
instance).
Lap timer - MyChron Light TG
14/10/2005 Lap Timer
– Version 1.04
MyChron Light TG
1