Reset; Monitor Window - Hitachi SJ700-2 Series Instruction Manual

Chapter 4 How To Use EzSQ

4.12 Reset

- You can reset the tripping inverter by performing a reset operation on EzSQ.
1) - Select "Reset" from the "Run" menu on the menu bar.
(You can also execute this command by clicking the
on the keyboard.)

4.13 "Monitor Window"

(1) Display fields
"Debug" section
- "Program Count" (1): Displays the program line number of the line that is currently being executed.
- "Program Status" (2): Displays the program execution status.
"INV Monitor" section
You can monitor various items of the inverter on the personal computer without having to connect the
digital operator to the inverter. (For details, refer to the SJ700 Series Inverter Instruction Manual.)
- "FM" (1): Monitors the inverter output frequency in the same way as the output frequency
monitoring function (code "d001") of the inverter.
- "Iout" (2): Monitors the inverter output current in the same way as the output current monitoring
function (code "d002") of the inverter.
- "Dir" (3): Monitors the motor-rotation direction in the same way as the rotation direction
monitoring function (code "d003") of the inverter.
- "PID-FB" (4): Monitors the PID feedback data in the same way as the process variable (PV), PID
feedback monitoring function (code "d004") of the inverter.
- "IN-TM" (5): Monitors the intelligent input terminal status in the same way as the intelligent input
terminal status function (code "d005") of the inverter.
- "OUT-TM" (6): Monitors the intelligent output terminal status in the same way as the intelligent output
terminal status function (code "d006") of the inverter.
(1)
(2)
icon under the menu bar or pressing the F4 key
(1)
(2)
(3)
(4)
4 - 18
(5)
(6)