Suzuki GSX-R150 Owner's Manual page 49

Table of Contents

Advertisement

CLOCK 6
Time is shown when the main switch knob is
in the " (ON)" position. The clock has a
12-hour display. Follow the procedure below
to adjust the clock.
1. To adjust the clock, press and hold the
SEL button 1 and the ADJ button 2
simultaneously for 2 seconds until the
clock display blinks when adjusting
clock.
2. Push the SEL button 1 to adjust the
hour display.
3. Push the ADJ button 2 to adjust the
minute display.
4. Press and hold the SEL button 1 and
the ADJ button 2 simultaneously for 2
seconds to return to the clock mode.
NOTE:
When the SEL button 1 or ADJ button
2 is pressed and held, the display will
increase continuously.
The clock can be adjusted when the
main switch knob is in the " (ON)" posi-
tion.
This clock is powered by the battery of
the motorcycle. If your motorcycle is to
be left unused more than two months,
remove the battery from the motorcycle.
GEAR POSITION INDICATOR 7
The gear position indicator indicates gear
position. This indicator displays "0" when the
transmission is in neutral.
2-35

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GSX-R150 and is the answer not in the manual?

Questions and answers

Real
April 19, 2025

i want to change the ballracer to an aftermarket roller bearings. which size is recommended?? i just want to know about the measurements of the ballracer. thanks

This manual is also suitable for:

Gsx-s150

Table of Contents

Save PDF