Installing Samsung Digital Presenter Software
The supplied Samsung Digital Presenter program CD contains :
• USB driver
• Samsung Digital Presenter program
To control your Samsung Digital Presenter on the PC, save the images into the computer
HDD, or print the images, you must connect Samsung Digital Presenter to the PC through
USB interface, then install the USB driver and Samsung Digital Presenter program using the
supplied program CD.
Follow the procedures below.
System requirements
To install the Samsung Digital Presenter software, your computer must have at least the
following system configuration :
• IBM or IBM compatible computer with a Pentium II 350Mhz or higher processor(*USB 2.0:
Pentium 4 or higher)
• Windows 98 or later(*USB 2.0: Windows 2000 pro or later)
• Display : XGA 1024 x 768, 65536 colors or higher
• USB 2.0/1.1 interface connector(*USB 2.0: On-board type USB chipset recommended)
• 64MB or higher RAM(*USB 2.0: 128MB or higher recommended)
• CD-ROM drive
✔
Note : • USB 2.0 mode is not officially supported in the Windows 98/98SE/ME OS.
2
• USB 2.0 PCI Cards or USB 2.0 PCMCIA Cards are not formally supported.
• It cannot perform at regular speed when you use PCI/PCMCIA type USB
2.0 card.