Table of Contents
Advertisement
Installation(continued)
Attaching the drop prevention kit to the projector
Attach the wire rope to the projector (sold separately).
Adjustment leg
Adjustment leg
Flat washer
Wire rope
1) T urn the adjustment leg (one) counterclockwise to
remove it from the projector.
2) Pass the supplied flat washer (one) and wire rope
through the adjustment leg (one) as illustrated on
the left.
3) Turn the adjustment leg clockwise to secure it to
the projector.
Note
z For installing the ceiling mount brackets (for low
and high ceilings) (sold separately) to this bracket
as well as attaching the wire rope to the ceiling,
refer to the respective installation instructions.
ENGLISH - 11
Advertisement
Table of Contents
