Utility-Lan Setting; Utility-Default Parameters - Panasonic KX-TVM200E Service Manual

KX-TVM200E / KX-TVM200NE

7.12. UTILITY-LAN SETTING

The System Administrator can set the IP address and Port Number for the VPS. After you changed the Port Number or Default
Gateway, you need to restart the VPS.
Follow the steps below for LAN Settings:
1. Click Utility in the menu bar.
2. Select LAN Settings.
3. Edit parameters in the LAN Settings dialogue box.
4. Click OK.
IP Address
Specifies the IP Address for VPS.
Subnet Mask
Specifies the Subnet Mask for IP Address.
Default Gateway
Specifies the IP Address for Default Gateway.
Port No.
Specifies the Port No. for VPS.
Value Range
1-65535

7.13. UTILITY-DEFAULT PARAMETERS

Specifies TVM Type, Mailbox No. Length, System Manager´s Mailbox No., Message Manager´s Mailbox No., PBX Type,
Integration Mode, and some parameters as the default settings.
Follow the steps below for Default Parameters:
1. Click Utility in the menu bar.
2. Select Default Parameters.
Set Default
1. Select "Set Default".
2. Specify TVM Type, PBX Type, Integration Mode, and set parameters.
3. Click OK.
Load Default: Loads the parameters programmed in "Set default" to the VPS.
1. Select "Load Default".
64