Utility-System Initialize/Restart - Panasonic KX-TVM200E Service Manual

KX-TVM200E / KX-TVM200NE
7.7.

UTILITY-SYSTEM INITIALIZE/RESTART

The System Initialise/Restart is used to restart the VPS. There are 2 methods as follows:
a) Initialise System: clears all voice data except the installed system guidance, and returns all system parameters to their default
settings. The System Administrator has to specify the following parameters before initialising the system:
- Mailbox No. Length
- System Manager´s Mailbox No.
- Message Manager´s Mailbox No.
b) Restart System: restarts the system. The VPS is not initialised.
Follow the steps below to initialise or restart the VPS:
1. Click Utility in the menu bar.
2. Select System Initialise/Restart.
Initialise System
1. Select "Initialise System".
(You can click the icon in the tool bar instead of step 1 and 2.)
2. Specify "Mailbox No. Length (2-5 digits)", "System Manager´s Mailbox No." and "Message Manager´s Mailbox No."
3. Click Next.
4. If there are active ports, the System Administrator will be asked to either to continue or to cancel.
Select OK to continue, or Cancel to close the ports.
5. Click OK.
Restart System
1. Select "Restart System".
(You can click the icon in the tool bar instead of step 1 and 2.)
2. If there are active ports, the System Administrator will be asked to either to continue or to cancel.
Select OK to continue, or Cancel to close the ports.
3. Click OK.
62