Download Print this page
Forest garden Ultima Arch Assembly Manual

Forest garden Ultima Arch Assembly Manual

Advertisement

Quick Links

SHOULD YOU REQUIRE ANY ADDITIONAL GUIDANCE WITH THE ASSEMBLY OF YOUR ARBOUR PLEASE
CONTACT OUR TECHNICAL HELP LINE ON 0844 248 9853.
"IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY"
Thank you for choosing this arch manufactured by the UK's largest manufacturer of timber garden products. In order to gain the most benefit from it, please note
the following:
- If there are any technical queries with the product, please contact our customer help line on 0844 248 9853 between the hours of 8.30 am and 5.00 pm Monday to
Friday.
-This product is pressure treated to ensure the longevity of all timber components and protect against rot. This may leave a colour difference on some parts that will
even out as a the moisture content stabilises.
- Please ensure that you thoroughly check all component parts for quantity and quality before you commence building the product. If there are any missing parts,
please contact the help line as shown immediately. The manufacturer cannot be held liable for damaged items once any part of the product has been fitted or altered
in any way (e.g. Painted)
- Timber is a natural material. It will shrink and swell as a result of varying moisture content.
- Please keep all plastic bags and small parts away from children in order to reduce the risk of suffocation.
Fixing Pack Contents (UPARTFP) :
Important :
Assembly
of this arch
requires
two people.
Required Tools : (Not Supplied )
DRILL
POZI DRIVE SCREWDRIVER
HAMMER
TAPE MEASURE
SPIRIT LEVEL
Helpful Tip : use the illustration of the screw/nail shown in each step to help you
identify which fixing is required during the assembly of your arch.
Please note : arbour uprights will need to be concreted 465mm into ground.
Alternatively, if using post supports, you will be required to trim 465mm off the
bottom of each post.
Forest Garden Ltd, Units 291 & 296 Hartlebury Trading Estate, Hartlebury, Worcestershire, Dy10 4JB
ULTIMA ARCH ASSEMBLY
70mm Screw x 10
50mm Screw x 24
4
2
UPARTSU
ELD62
POST 2400mm
PLANED LATTICE 6x2ft
2
2
3
UPARTNRSN
UPARTNRLN
URCB6
SMALL
LARGE NOTCHED
LONG RAFTER
NOTCHED
RAFTER
4
UCBC
ANGLED
BRACE
ISSUE 0210
1820
1355
1465
790

Advertisement

loading
Need help?

Need help?

Do you have a question about the Ultima Arch and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Forest garden Ultima Arch

  • Page 1 Please note : arbour uprights will need to be concreted 465mm into ground. Alternatively, if using post supports, you will be required to trim 465mm off the bottom of each post. Forest Garden Ltd, Units 291 & 296 Hartlebury Trading Estate, Hartlebury, Worcestershire, Dy10 4JB...
  • Page 2 70mm 50mm screws. Position the angled braces (UCBC) So that they are flat onto the uprights and the long rafters. Secure using 1x50mm through each end. Forest Garden Ltd, Units 291 & 296 Hartlebury Trading Estate, Hartlebury, Worcestershire, Dy10 4JB...

This manual is also suitable for:

Uparthd