Texas Instruments TMS570 Quick Start Manual

Quick Start Guide: TMS570
Microcontroller Development Kit
The TMS570 Microcontroller Development Kit (MDK) is ideal for evaluating and starting development with the TMS570 family of
devices. It is comprised of a CPU card and an I/O base board. The kit contains on board XDS100v2 JTAG emulation along with
access to several key communication and peripheral interfaces.
TMS570 Microcontroller Development Kit Features:
- 337p BGA TMS570LS20216 MCU
- CPU Card and I/O Base Board
- On Board USB XDS100v2 JTAG
- Ambient Light & Temp Sensors
- 3 CAN Transceivers
- 2 FlexRay Transceivers
- 1 LIN Tranceiver
DCAN3
- On Board SCI to USB Serial
DCAN2
- Color Touch Screen LCD
- NHET and GIO LEDs
DCAN1
- 1 RS485 Transceiver
LIN2
- Multiple Sensor Interfaces
20 pin JTAG
RS485
FlexRay
LCD Touch Screen
Micro SD
IMPORTANT: Code Composer Studio 4.x or the TMS570 Safety MCU Demo software must be installed
before the USB mini-B cable for the CPU card's XDS00v2 JTAG is plugged into the PC!
The platform bar and Code Composer Studio are trademarks of Texas Instruments. All other trademarks are the
property of their respective owners. © 2010 Texas Instruments Incorporated.
337p (BGA) USB mini-B: XDS100v2
TMS570LS20216 MCU JTAG SCI to USB
+12V DC Power Input
MIPI
Relay Solenoid Drivers Light Temperature
Board Confidence Test & Demo: The TMS570 Microcontroller Development Kit (MDK) Confidence Test &
Demo Application allows verification most functions of the CPU and I/O board's functionality. It also provides a
demonstration of some of the kit's functionality. This application comes pre-programmed into the TMS570 flash
memory and will automatically run when the +12V DC power supply is connected to the kit. The demonstration
is controlled using the menus on the board's LCD. The application is included on the MDK DVD and can re-
programmed at a later time.
Board Confidence Test & Demo Features:
- Temperature and Ambient Light Sensor Bar Graph Demo
- SD-Card ID and Size Identification
Sensor Interface
- Memory Test for on board RAM, FRAM and EEPROM
- Input Sensor Voltage Display
GIO & NHET LEDs
Pressure Sensor
Medical
Push Buttons
SPNU494
User Interface
Temperature and Ambient Light Demo
The full MDK user guide may be viewed at:
http://www.keil.com/support/man/docs/mcbtms570