Bestpath As-Path Multipath-Relax (Bgp) - Cisco Nexus 3548 Command Reference Manual

Chapter Unicast Routing Commands

bestpath as-path multipath-relax (BGP)

To configure a Border Gateway Protocol (BGP) routing process to consider the different autonomous
system (AS) paths and load balance multiple paths during best path route selection, use the bestpath
as-path multipath-relax command. To return the BGP routing process to the default operation, use the
no form of this command.
Syntax Description This command has no arguments or keywords.
Command Default
None
Command Modes
Router BGP configuration mode
VRF configuration mode
Command History Release
5.0(3)U1(2)
Usage Guidelines Before you use this command, ensure that BGP is enabled on the switch by using the feature bgp
command.
This command requires the LAN Enterprise Services license.
Examples
This example shows how to configure multipath load sharing on paths from different autonomous
systems in router mode:
switch# configure terminal
switch(config)# router bgp 120
switch(config-router)# bestpath as-path multipath-relax
switch(config-router)#
Related Commands Command
feature bgp
show ip bgp
show running-config bgp
OL-27852-01
bestpath as-path multipath-relax
no bestpath as-path multipath-relax
Modification
This command was introduced.
Description
Enables BGP globally.
Displays information about BGP routes.
Displays the running configuration for BGP for IPv4 networks.
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
bestpath as-path multipath-relax (BGP)
51