Safety Precautions; Handling Cautions; Accessories / Options; Remote Control Batteries - Panasonic TY-FB8TA Operating Instructions Manual

Safety Precautions

WARNING
• Never attempt to disassemble or modify this product.
To avoid fire, shock, or failure.
• If you sense smoke, an odd odor, or unusual noises while in operation, immediately unplug the unit.
Switch off and unplug the unit from the supply outlet.
To avoid fire or shock, do not leave the power of the unit turned on.
• To avoid shock or other problems, do not leave the unit plugged into the supply outlet.
• Please contact our designated service department for installation or change of this product.
To Service personnel:
Before removing or installing the Terminal Board, be sure to turn the power of the unit off and unplug
the power cord plug from the supply outlet.

Handling Cautions

• Do not touch the connector contacts with hands directly.
To avoid electrostatic damage to internal parts, before handling this product, touch a large metallic object such as
a steel cabinet to discharge yourself.
• Be sure to use the supplied cable or specified parts for interconnection.
To avoid malfunction or failure, do not use parts other than those recommended.

Accessories / Options

Please check and identify the supplied accessories.
• Remote control
N2QAYB000020
Optional accessory
• Set Up Loader
TY-RM09SL

Remote Control Batteries

1. Open the cover.
2. Insert batteries. Note the correct
polarity (+ and -).
R6(AA) size
• Remote control batteries
(2 × R6(AA) size)
• Terminal board
replacement Instructions
Precautions
Mishandling of batteries can cause electrolyte leakage which can damage
items the fluid contacts and may cause a fire.
• Do not mix old and new batteries.
• Do not use different types at the same time. (ex. zinc carbon and alkaline)
• Do not heat or expose to flame.
• Do not take apart or short circuit.
• Do not attempt to recharge, short-circuit, disassemble, heat or burn
used alkaline or manganese batteries.
• Replace the batteries if the remote control does not work properly.
• Do not burn or breakup batteries.
Batteries must not be exposed to excessive heat such as sunshine, fire
or the like.
For your reference
Use alkaline batteries for longer life.
• Terminal function label (1 sheet)
( Affix this label to the applicable slot of the rear
panel of the unit.)
• Ir System cord (× 1)
(K2ZZ02C00006)
• Screw (× 4)
3