Hotel Mode Set Up - Panasonic TY-FB8TA Operating Instructions Manual

Hotel mode Set up

Press the MENU button
Press the Programme Number Selection UP
buttons, the Direct Programme Number
buttons, button in order within 1 second (as for
button, press and hold for 3 seconds).
Move to choose menu option.
Adjust chosen option.
Note:
Turn the power off and on again to enable the new settings
with the remote control or directly pressing the unit button.
Hospitality Mode Select "ON" when you use this terminal board.
OFF / ON
Note: Be sure to select "OFF" when you do not use
Select the input mode when power-on.
Initial INPUT
OFF / TV / AV / SLOT / PC
Notes:
• SLOT option cannot be shown when no SLOT insertion.
• INPUT Lock will be OFF if this mode is set during
INPUT lock Always set the TV input signal.
OFF / TV
Note: Initial INPUT will be OFF if this mode is set during
Initial POS Set the position when power-on.
When "POSITION" is selected in "CH SELECT"
OFF / 0 - 99
When "DIRECT" is selected in "CH SELECT"
OFF / 0 - 125
Note: Valid only when "TV" is selected in "Initial INPUT".
Channel lock Always select the "POSITION" which is set in "Initial POS".
When "OFF" is selected in "Initial POS", always select the position which is set at the time.
OFF / ON
Initial Volume Level Set the volume when power-on.
OFF / 0 – 63
Maximum Volume Level Set the maximum volume.
OFF / 0 – 63
OSD OFF Set the "Recall" display OFF when power-on.
OFF / ON
Note: INPUT signal and aspect are displayed even when this setting is set to "ON".
Button lock Prohibit the key operation on the control panel.
Prohibit all the operations on the control panel when "All" is selected.
When "MENU and ENTER" is selected, prohibit the key operation of Menu and Enter on
control panel.
OFF / MENU and ENTER / All
Remote lock Prohibit the MENU key reception on the remote control.
OFF / MENU
ES Timer Turn the power OFF when no operation continues for the set-up time.
OFF / 1 - 15
SLEEP Turn the power OFF when no signal and operation continue for 10 minutes.
OFF / ON
20
Hospitality Port as it is set to "ON" before the
shipping.
INPUT Lock setting.
Initial INPUT setting.
, DOWN
, ,
Hotel mode
Hotel mode
Hospitality Mode Hospitality Mode ON ON
Initial INPUT OFF
INPUT lock OFF
Initial POS OFF
Channel lock OFF
Initial Volume Level OFF
Maximum Volume Level OFF
OSD OFF OFF
Button lock OFF
Remote lock OFF
ES Timer OFF
SLEEP OFF