The "Settings - Reader Interface" Menu Item - Siemens SIMATIC RF185C Operating Instructions Manual

Parameter
Additional information
Return value
Call parameters
Status telegrams
7.3.3

The "Settings - Reader Interface" menu item

With the "Settings - Reader interface" menu item, up to four readers can be defined
depending on the communications module type. If the communications module is connected
to an S7 controller, the configurations are made via the controller. In this case, the set values
are only displayed in the WBM and cannot be edited.
The settings of each interface are identically structured and divided into the following areas:
● Basic settings
● Reader parameters
Figure 7-5 The "Settings - Reader Interface" menu item
SIMATIC RF185C, RF186C, RF188C
Operating Instructions, 10/2018, C79000-G8976-C512-01
Description
Return values for the commands of the user application and for the written or
read transponder data.
Call parameters for the commands of the user application
Recording status commands in PLC communication. Can be switched off if the
status commands are used as cable monitoring. In this way, the logbook is
kept free for user data.
Configuring with the WBM
7.3 The menu items of the WBM
63