Table of Contents
Advertisement
SALES NETWORK
SAMSUNG TECHWIN CO., LTD.
•
145-3, Sangdaewon 1-dong, Jungwon-gu, Seongnam-si,
Gyeonggi-do 462-703, Korea
TEL : +82-31-740-8137~8141 FAX : +82-31-740-8145
SAMSUNG OPTO-ELECTRONICS AMERICA,INC.
•
ELECTRONIC IMAGING DIV.
40 Seaview Drive, Secaucus, NJ 07094, U.S.A
TEL : +1-201-902-0347
FAX : +1-201-902-0429
SAMSUNG TECHWIN MOSCOW OFFICE
•
Korp 14, 37-A, PR-KT, Lenningradsky, Moscow 125167, Russia
TEL : +7-95-258-9296,9298 FAX : +7-95-258-9297
www.samsungtechwin.com
www.samsungcctv.com
SAMSUNG OPTO-ELECTRONICS UK, LTD.
•
Samsung House, 1000 Hillswood Drive, Hillswood Business
Park Chertsey, Surrey KT16 OPS
TEL : +44-1932-45-5308 FAX : +44-1932-45-5325
TIANJIN SAMSUNG OPTO-ELECTRONICS CO., LTD.
•
7 Pingchang Rd, Nankai Dist. Tianjin 300190, P.R China
TEL : +86-22-2761-4724(33821) FAX : +86-22-2761-6514
P/No. : Z6806-0682-01A
VAN 05. 10
About this manual
Before installing and using the camera, please read this manual carefully. Be sure to keep it handy for later reference.
HIGH RESOLUTION COLOR CAMERA
INSTRUCTION MANUAL
SDC-313A SERIES
Advertisement
Table of Contents
Related Manuals for Samsung SDC-313A Series
Summary of Contents for Samsung SDC-313A Series
-
Page 1: Instruction Manual
TEL : +7-95-258-9296,9298 FAX : +7-95-258-9297 www.samsungtechwin.com www.samsungcctv.com About this manual P/No. : Z6806-0682-01A Before installing and using the camera, please read this manual carefully. Be sure to keep it handy for later reference. VAN 05. 10 HIGH RESOLUTION COLOR CAMERA INSTRUCTION MANUAL SDC-313A SERIES... - Page 2 Thank you for purchasing a SAMSUNG CCD CAMERA. Before operating the camera, confirm the camera model and proper input power voltage. In order to that you can understand this manual thoroughly, we'll introduce our model description. SDC-313A SERIES • NTSC MODELS • PAL MODELS SDC-313AND...
-
Page 3: Table Of Contents
Contents Precautions Composition Name and Function of Each Section FRONT SIDE BOTTOM BACK Installation Lens Connecting to a monitor Connecting to power COLOR CCD CAMERA User’s Manual Camera Operation Menu Settings • LENS (selection) • SHUTTER (condition and speed control) •... - Page 4 Features Horizontal Resolution 530 TV Lines Clear image quality has been achieved by employing a CCD with 410,000 pixels(NTSC), 470,000 pixels (PAL), which provides a horizontal resolution of 530 TV lines. Electronic IRIS The electronic IRIS function enables continuous automatic control of the shutter between 1/60(1/50) ~ 1/120,000 seconds.
-
Page 5: Precautions
Precautions Do not install under extreme Do not install in high humidity temperature conditions. environment. Use only under temperature conditions May lower image quality. between -10˚C and +50˚C. Provide good ventilation when using in high temperature conditions. Do not install under unstable Avoid touching the camera lens. -
Page 6: Front
Component 1. HIGH RESOLUTION COLOR CAMERA 2. Auto iris lens connection plug 3. C-Mount adaptor 4. Instruction manual COLOR CCD CAMERA User’s Manual Names and Functions of Parts FRONT CCD protection cap Please cover the CCD SENSOR when not using it. C-Mount lens adaptor Please attach the C-Mount lens here. -
Page 7: Side
Names and Functions of Parts SIDE Auto iris lens connector This is the connection terminal for the auto iris lens. COLOR CCD CAMERA User’s Manual BOTTOM Mounting bracket screw hole 1/4"-20 UNC (20 THREAD) Please use the screw hole when L:4.5mm±0.2mm (ISO standard), fixing the camera onto the or 0.197"... -
Page 8: Back
Names and Functions of Parts BACK Auto iris lens selection switch Please change the mode to DC or VIDEO depending on the type of auto iris lens being used. Video output terminal Sends video signal and connects to the video input terminal of the monitor. Power input terminal Connects to the power appropriate to each model. - Page 9 Installation 3. Please remove the cover of the auto iris lens connection plug and solder the lens cable to the connector pin in the plug. LENS Pin No. VEDIO No.1 Pin Damping- Red (power) No.2 Pin Damping+ No.3 Pin Drive+ White (video signal) No.4 Pin Drive-...
-
Page 10: Connecting To A Monitor
Installation Connecting to a Monitor Please connect the video output terminal located on the back of the camera to the monitor. CCD Camera • The connection method varies depending on the type of monitor and accessories. Please refer to the user's manual for each instrument. •... -
Page 11: Camera Operation
Camera Operation Menu SETUP menu LENS (selection) · MANUAL · DC/VIDEO SHUTTER (Conditon and speed control) · ESC · MANUAL · FLK WHITE BALANCE control · ATW · AWC · OFF · LOW BACKLIGHT (Backlight compensation) · HIGH AGC (Auto Gain Control) ·... -
Page 12: Lens (Selection)
Camera Operation Select any function you wish to operate by using the UP and DOWN buttons. 3. Please press the LEFT or RIGHT button if you wish to change mode. • When the LEFT or RIGHT button is pressed, available values and modes are displayed in order. -
Page 13: Shutter (Condition And Speed Control)
Camera Operation SHUTTER (condition and speed control) Because of using the DC lens, the shutter speed is fixed at 1/60. 1. When the SETUP menu is on the screen, please position the arrow to point to 'SHUTTER' by using the DOWN button. 2. -
Page 14: Backlight (Backlight Compensation)
Camera Operation BACKLIGHT (Backlight Compensation) When there is a strong backlight behind the object, clear images of the background as well as the object can still be obtained by using the BACKLIGHT function. 1. Please position the arrow to point to 'BACKLIGHT' on the SETUP menu by using the UP and DOWN buttons. -
Page 15: Ssnr (Samsung Super Noise Reduction)
Camera Operation SSNR (Samsung Super Noise reduction) The background noise in the low light level decreases automatically as the level of gain changes. 1. Please position the arrow to point to 'SSNR' on the SETUP menu by using the UP and DOWN buttons. 2. -
Page 16: Special
Camera Operation SPECIAL 1. Please position the arrow to point to 'SPECIAL' on the SETUP menu by using the UP and DOWN buttons. 2. Please select the mode you wish to operate by pressing the UP or DOWN button. CAMERA ID: If the ID is input, the camera ID appears on the monitor. 1) Please position the arrow to point to 'CAMERA ID' by using the UP or DOWN button. - Page 17 Camera Operation 5) When a name has been chosen, please select a position for the name display. Please move the cursor onto 'POS' and then press the SETUP button. Camera ID A B C D E F G H I J K L M N O P Q R S T U V W X Y Z a b c d e f g h i j k l m n o p q r s t u v w x y z...
-
Page 18: Exit
Camera Operation PRIVACY: This modes conceals the areas you do not wish to appear on the screen. - OFF : Cancels the PRIVACY mode. - ON : Operates the PRIVACY mode. •Please press the SETUP button. •Please select the area you do not wish to appear from the 4 areas in AREA SEL mode. •Please select ON mode for the chosen area. -
Page 19: Troubleshooting
Troubleshooting If you have trouble operating your camera, refer to the following table. If the guidelines do not enable you to solve the problem, contact an authorized technician. Problem Solution • Please check the power connection. Nothing appears on • Please check the video signal line connection. the screen. -
Page 20: Specification
Specifications Item SDC-313ANA SDC-313AND SDC-313APA Power Source AC24V, 60Hz DC12V AC24V, 50Hz 3.5W(Max) 2.5W(Max) Total Pixels 811(H) x 508(V) Effective Pixels 768(H) x 494(V) Size 1/3'' Super HAD color CCD Scanning System 2:1 Interlace Synchronization INT/LL Selectable INT/LL Selectable 0~359°(Adjustable) 0~359°(Adjustable) Frequency Horizontal:15.734 KHz Vertical :59.94HzHorizontal: 15.625 KHz Vertical : 50Hz...