Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Samsung SDC-89440BF
Summary of Contents for Samsung SDC-89440BF
- Page 1 4M AHD Analog Bullet Camera User Manual SDC-89440BF...
- Page 2 4M AHD Analog Bullet Camera User Manual Copyright ©2016 Co., Ltd. All rights reserved. Hanwha Techwin Trademark Each of trademarks herein is registered. The name of this product and other trademarks mentioned in this manual are the registered trademark of their respective company. Restriction Copyright of this document is reserved.
-
Page 3: Important Safety Instructions
overview important Safety inStructionS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean the contaminated area on the product surface with a soft, dry cloth or a damp cloth. (Do not use a detergent or cosmetic products that contain alcohol, solvents or surfactants or oil constituents as they may deform or cause damage to the product.) Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions. -
Page 4: Safety Precautions
overview Safety precautionS CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN caution : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit. - Page 5 caution Do not drop objects on the product or apply strong shock to it. Keep away from a location subject to excessive vibration or magnetic interference. Do not install in a location subject to high temperature, low temperature, or high humidity. Doing so may cause fire or electric shock.
-
Page 6: Table Of Contents
overview contentS overview Important Safety Instructions Safety Precautions Contents Product Features Part Names and Functions inStallation Precautions Installing the camera Protection of Cable from Water Connecting the DVR appendix Product Specification Product Overview Troubleshooting 6_ overview... -
Page 7: Contents
Check if the product package includes the following items. SDC-89440BF User Manual Type L-Allen wrench Screw... -
Page 8: Part Names And Functions
overview part nameS and functionS Name Description Lens 3.6mm focal length enables you to monitor at a wider field of view IR LED Infrared LED lights are controlled by the illumination sensor. Illumination Sensor Detects incoming light to control the IR LED. BNC Cable BNC terminal for video signal output. -
Page 9: Precautions
installation precautionS Ensure you read out the following instructions before installing the camera: • Select an area (ceiling or wall) that can withstand 5 times the camera weight • Stuck-in or peeled-off cables can cause damage to the product or a fire. •... -
Page 10: Protection Of Cable From Water
installation protection of cable from water If this product is mounted outdoor, water leakage may occur at gap between cables. As shown below, butyl rubber (available on the market) shall be used to protect from water. 1. Connect power supply and BNC power source. 2. -
Page 11: Product Specification
appendix product Specification Item Details Video Imaging Device 4M CMOS (1/3”) Effective Pixels 2560(H) x 1440(V) Scanning System Progressive, 30fps(NTSC)/25fps(PAL) Synchronization Internal Horizontal Resolution 1440p Min. Illumination 0 Lux (IR LED ON) Camera Output Max. Transmission Length: 180ft (3EA attached 60ft camera cable combined) Lens Focal Length 3.6mm... - Page 12 appendix Item Details Environmental -30°C ~ +50°C (-22°F ~ +122°F) / Less than 90% RH Operating Temperature / Humidity ※ Startup : -10°C ~ +50°C Ingress Protection IP66 Electrical Input Voltage Power Consumption Mechanical Color / Material White / Metal Dimension (Ø...
-
Page 13: Product Overview
product overview unit : mm(inch) [5.33] [5.87] [0.14] [3.06] [2.73] [2.68] [2.13] English _13... -
Page 14: Troubleshooting
appendix troubleSHootinG Please refer to the following table if you have problems during camera operation. Please contact with the authorized technicians if your problem cannot be solved through the guidance. Problem Troubleshooting There is no content displayed on y Check whether the power cable and the cable between camera and monitor are connected correctly. - Page 15 Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
- Page 16 Head Office 86 Cheonggyecheon-ro Jung-gu Seoul 04541 Korea Tel +82.2.729.5277, 5254 Fax +82.2.729.5489 www.hanwha-security.com Hanwha Techwin America 500 Frank W. Burr Blvd. Suite 43 Teaneck, NJ 07666 Toll Free +1.877.213.1222 Direct +1.201.325.6920 Fax +1.201.373.0124 Hanwha Techwin Europe Heriot House, Heriot Road, Chertsey, Surrey, KT16 9DT, United Kingdom Tel +44.1932.57.8100 Fax +44.1932.57.8101...