Integra MEDIAJET Operating Instructions

MEDIAJET – Connection Kit for inkjet printer LINX
(bottom print)
Instructions V02 for bottom print installation
Document Change History
Vers. Status:
V00 Released 15.10.2012 Document issued.
V01 Released 12.10.2018 New image, terms unified.
V02 Released 10.05.2019 Adaptions for printhead MK11.
Table of Contents
1

Introduction ------------------------------------------------------------------------------------------------------ 1

2

Required Accessories and Documentation ----------------------------------------------------------- 1

3 Mount printhead onto MEDIAJET ------------------------------------------------------------------------- 2
4 Imprint ------------------------------------------------------------------------------------------------------------- 3
1 Introduction
This document describes installation and connection of the LINX inkjet printhead (bottom print) to
the MEDIAJET (MJ) dish filler. The following LINX types are supported:

LINX 4900 (discontinued), printhead MK7

LINX 5900 (discontinued), printhead MK7

LINX CJ400 (discontinued), printhead MK11

LINX 89xx, printhead MK11
Before starting with the installation, please carefully read MJ and LINX operating instructions. Please
note that MJ units manufactured before Mai/June 2010 (serial numbers below 10310372/11310129)
are not compatible with LINX inkjet printers for bottom print. Connection kits manufactured before
May 2019 are not compatible with printhead MK11.
2 Required Accessories and Documentation
The components listed below are required to connect the inkjet printer to MEDIAJET.
Components available from INTEGRA Biosciences:
6
103956_V02_OI_Connection_Kit_LINX_bottom.docx
Date: Change:
5

MEDIAJET Dish Filler (Part no.
103005/103006/113000/113001/113002)

MJ Operating Instructions
1
(Part no. 103950)

Connection kit (Part no. 113840) for LINX
(bottom print), consisting of:
2
1 Flange
2 Disc without or with slot
3
3 Hexagon screw M5x16 (3x)
4 4 Screw cap (2x)
5 Tube
6 Interface cable MJ to LINX (113853)
This instructions for installation.
1/3 13. May 2019