Transmission Frequency; Qt/Dqt Decode; Qt/Dqt Encode; Channel Name - Kenwood TKR-750 Programming Reference Manual

6.2.2

Transmission Frequency

It can configure a Frequency to transmit. Enter a value in
the edit box. directly
TKR-750/751
Range
TKR-850/851
Default Blank
Note:
! The frequency range varies depending on the model and the
market code. (Refer to FUNC 1.2 Transmission/Reception
Frequency.)
! It can use numbers, ".", and "," for the 9th digit of the frequency.
! You must enter the value within the range when configuring the
frequency. When entering the frequency, which is out of the
range, it will be automatically replaced with the highest value or
the lowest value within the range configured in "Model
Information" > "Frequency" window.
Information.)
6.2.3

QT/DQT Decode

It can configure a signalling to receive a call. Select a QT
tone or DQT code from the dropdown list. You can also
directly enter the QT tone and the DQT code.
Note:
! When both of the QT Encode and the QT Reverse Burst
functions are enabled, the TKR-750/850/751/851 transmits a QT
Reverse Burst code at end of transmission.
! When the DQT Encode is selected, the TKR-750/850/751/851
transmits a DQT Turn-off Code.
# Selecting the QT/DQT Decode Code from the
Dropdown List:
QT
Range DQT Normal
DQT Inverse
Default None
# Directly entering the QT/DQT Decode Code:
QT
Range DQT Normal
DQT Inverse D000I - D777I
QT
In steps of
DQT
Default None
Note:
! You can use numbers, "D", "N", "I", ".", and "," for the 5th digit of
the QT/DQT Encode code.
Version: 1.01
100.00000 - 280.00000 MHz
327.00000 - 550.00000 MHz
(Common to all ranges)
(Refer to 5.1 Model
67.0 - 250.3 Hz
D023N - D754N
D023I - D754I
67.0 - 254.1 Hz
D000N - D777N
0.1 Hz
1
Field Programming Reference (FPRG)
! When entering only numbers, the code is automatically
configured as the QT Tone.
! When entering "D" as the first character of the code, the code is
automatically configured as the DQT code.
! When entering the value, which is out of the range, it will be
automatically replaced with the highest value or the lowest value
in the range.
6.2.4

QT/DQT Encode

It can configure a signalling to make a call. You can select
a QT tone or DQT code from the dropdown list. You can
also directly enter the QT tone and the DQT code.
# Selecting the QT/DQT Encode Code from the
Dropdown list:
QT
Range DQT Normal
DQT Inverse D023I - D754I
Default None
# Directly entering the QT/DQT Encode Code:
QT
Range DQT Normal
DQT Inverse D000I - D777I
QT
In steps of
DQT
Default None
Note:
! You can use numbers, "D", "N", "I", ".", and "," for the 5 digits of
the QT/DQT Encode code.
! When entering only numbers, the code is automatically
configured as the QT Tone.
! When entering "D" as the first character of the code, the code is
automatically configured as the DQT code.
! When entering the value, which is out of the range, it will be
automatically replaced with the highest value or the lowest value
in the range.
6.2.5

Channel Name

It can configure the Channel Name. The configured
channel name appears on the Channel/Status display
when selecting the channel with the PF key. (Refer to
FUNC 1.6 Display.)
2 digits
Range 0 - 9, A, b, c, d, E, F, G, H, i, J, L, n, o, P, q, r, S,
t, U, y, -, =, _
Default Channel Number (1 - 16)
6 EDIT MENU
67.0 - 250.3 Hz
D023N - D754N
67.0 - 254.1 Hz
D000N - D777N
0.1 Hz
1
22