Assembly Instructions - Rad Power Bikes RadRover Owner's Manual

Assembly Instructions

NOTICE: The following assembly steps are only a general guide to assist in the assembly of your bike from Rad Power Bikes and is not a
complete or comprehensive manual of all aspects of assembly, maintenance, and repair. We recommend you consult a certified, reputable
bike mechanic to assist in the assembly, repair, and maintenance of your bike.
Step 1:
Unpack bike from the carton and carefully set out all contents of the box. Remove packaging material protecting the bike
frame and components. Please recycle packaging materials especially cardboard and foam (all #6 EPS foam). Ensure all pieces are
included in the package including:
If there are any missing parts, please contact Rad Power Bikes.
Step 2:
Install handlebar onto stem as shown in the assembly video for the RadRover located
in the Help Center at www.radpowerbikes.com/help. Be sure to center the handlebar and
ensure stem clamp faceplate bolts are secured to the recommended torque value.
Step 3:
Install front wheel. For detailed instructions please view the RadRover Assembly video
and Quick Release Installation video found in the Help Center at
www.radpowerbikes.com/help. Ensure front wheel and quick release are properly secured
before moving on to the next step. When properly installed, the front wheel should be fully
seated in the dropouts of the front fork, and the quick release lever should be fully and properly
secured as shown in the assembly and instructional videos.
•
RadRover
•
Front Wheel
•
Quick Release (in fork protector plate)
•
Manual(s)
•
Charger
•
Headlight
7
•
Assembly Toolkit
•
Pedals (marked left and right)
•
Keys (two, identical)