Panel Button Command; Paper Sensor Commands - Epson TM-T88 Information Manual

Panel Button Command

TheTM-T88/T88P ( TM-T85/T85P) supports the following command for enabling and disabling the
panel button (FEED):
Command Name
ESC c 5 Enable/disable panel buttons
ESC c 5 n
[Name] Enable/disable panel buttons
[Format] ASCII
Hex
Decimal
0 ≤ n ≤ 255
[Range]
ESC c 5 n enables or disables the FEED button. When the LSB (least significant bit) of n is 1, this
button is disabled; when it is 0, this button is enabled. To prevent problems caused by accidentally
pressing the FEED button, use this command to disable the button. When the PAPER OUT LED blinks
to indicate that the printer is waiting for a macro to be executed, the button is enabled (but paper
cannot be fed). For TM-T88/T88P, when the printer cover is open, and the paper roll end sensor
detects a paper end, paper cannot be fed by the button regardless of the setting of this command. For
TM-T85/T85P, when the printer cover is open, paper can be fed by the button regardless of the
setting of this command. When the paper roll end sensor detects a paper end, paper cannot be fed by
the button.
PRINT #1, CHR$(&H1B);"c5";CHR$(1); ←

Paper Sensor Commands

The TM-T88/T88P (TM-T85/T85P) supports the following commands for controlling the paper
sensor(s) that stop printing and output paper-end signals:
Command Name
ESC c 4 Select paper sensor(s) to stop printing
ESC c 3 Select paper sensor(s) to output paper-end signals
ESC c 4 n
[Name] Select paper sensor(s) to stop printing
[Format] ASCII
Hex
Decimal
Rev. A
TM-T88/T88P (TM-T85/T85P) Information Manual
ESC c 5
1B 63 35
27 99 53
Program Example
Disable panel button
ESC c 4
1B 63 34
27 99 52
n
n
n
n
n
n
Command Descriptions 1-19