Configuring Operation; Changing The Screen Settings - Siemens SIMATIC Mobile Client900RFN Operating Instructions Manual

Parameter assignment of a Mobile Client
4.5 Control Panel
Entering data
Key
4.5.5

Configuring operation

4.5.5.1

Changing the screen settings

Adapting the screen settings
The screen settings on the HMI device must match the settings in the project. To achieve a
high color depth on the HMI device, use objects with the same color depth on your
configuration PC. Objects with higher color depth need more computing power on the HMI
device. If you are monitoring and controlling time-critical processes, use a lower color depth
during configuration.
Note
Changed screen orientation takes effect only after reboot
With touch HMI devices, a change to the screen orientation only takes effect after you reboot
the HMI device. The configuration file is also deleted. Adapt the configuration to the new
screen orientation and transfer the project again to the HMI device.
Therefore, do not change the screen orientation in ongoing system operation.
Requirement
The Control Panel is open.
54
Function
Delete character left of cursor
Delete character right of cursor
Confirm input
Cancel input
Operating Instructions, 07/2015, A5E36360099-AA
Mobile Client900RXA