Table of Contents
Advertisement
Device maintenance and repair
9.2 Spare parts and repairs
9.2
Spare parts and repairs
Repairs
In case of repair, the HMI device must be shipped to the Return Center in Fürth. Repairs
may only be carried out at the Return Center in Fürth.
Depending on the work necessary to repair the device, the Center may decide to give you a
credit. A credit is only granted when the sender ordered a new HMI device.
The address is:
Siemens AG
Digital Factory
Returns Center
Siemensstr. 2
D-90766, Fürth, Germany
Spare parts
Spare parts and accessories for the HMI device can be found in section Accessories
(Page 12).
9.3
Recycling and disposal
The HMI devices described in these operating instructions can be recycled due to their low
levels of pollutants. Contact a certified disposal service company for environmentally sound
recycling and disposal of your old devices.
9.4
Maintenance application
A maintenance application is installed on the device for servicing purposes. The
"Maintenance" dialog displays device data and the operating times in the various different
temperature ranges:
● Version of the maintenance application
● Device name and order no. (MLFB)
● Serial no. of the device
● Operating system
● Device image and BIOS version
● Firmware version of the power supply board (SMM)
● Boot loader version
● MAC address and IP address
● BoxID
132
Operating Instructions, 07/2015, A5E36360099-AA
Mobile Client900RXA
Advertisement
Table of Contents
